Abstract:Stable and efficient syngas production via methane dry reforming is highly desirable as it utilizes two greenhouse gases simultaneously. In this work, active Ni–Cu nanoalloys stably anchored on periclase-phase MgAlOx nanosheets were successfully synthesized by a hydrothermal method. These highly dispersed small Ni–Cu alloys strongly interacted with the periclase-phase MgAlOx nanosheets, on which abundant base sites were accessible. On the optimal catalyst (6Ni6CuMgAl–S), methane and carbon dioxide conversion always reached 85 and 90% at 700 °C under a gas hour speed velocity of 40,000 mL/gcat h for more than 70 h. The hydrogen production rate was maintained at 1.8 mmol/min, and the ratio of H2/CO was kept at approximately 0.96 under a CH4 and CO2 flow rate of 25 mL/min. Coke deposition and Ni sintering were effectively suppressed by the formation of a Ni–Cu alloy, the laminar structure, and the periclase phase of the MgAlOx support. Moreover, the alloy nanoparticles were reconstructed into a segregated Ni–Cu alloy structure in response to the reaction environment, and this structure was more stable and still active. Density functional theory calculations showed that carbon adsorption was inhibited on the segregated Ni–Cu alloy. Furthermore, the experimental thermogravimetric and O2-TPO results confirmed the significant decrease in carbon deposition on the Ni–Cu alloy catalysts.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c14918.DFT theoretical calculation; additional characterizations of some catalysts, including XRD patterns, SEM images, N2 adsorption, desorption, and pore size distribution; H2-TPR profiles; H2-TPD profiles; HAADF image and element mapping; TEM images; XPS spectra; acid property; and additional reaction data (PDF)This article has not yet been cited by other publications.

High-Stability ZnAl2O4 Spinel-Supported Nickel Catalyst for High-Temperature Syngas Methanation

Effect of support texture properties on Ni-Fe/γ-Al_2O_3 catalyst structure and catalytic performance for CO methanation

Development of Highly Stable Ni-Al 2 O 3 Catalysts for CO Methanation

Partial Oxidation Of Methane To Syngas Over Ni-Based Catalysts

Modifying Spinel Precursors for Highly Active and Stable Ni‐based CO2 Methanation Catalysts

Enhanced stability of Ni/SiO2 catalyst for CO2 methanation: Derived from nickel phyllosilicate with strong metal-support interactions

Catalytic Methanation of Syngas over Ni-based Catalysts with Different Supports

Dry reforming of methane over nickel catalysts supported on magnesium aluminate spinels

Study on Methanation Performance of Biomass Gasification Syngas Based on a Ni/Al2O3 Monolithic Catalyst

Synergistic effect of Ni and NiO in hydrogen reduction for CO methanation

Nanocatalysts Anchored on Nanofiber Support for High Syngas Production Via Methane Partial Oxidation

Tuning metal-support interactions in nickel-zeolite catalysts leads to enhanced stability during dry reforming of methane

An active and stable nickel-based catalyst with embedment structure for CO2 methanation

An Al2O3-supported NiFe bimetallic catalyst derived from hydrotalcite precursors for efficient CO2 methanation

Facile preparation of a Ni/MgAl2O4 catalyst with high surface area: enhancement in activity and stability for CO methanation

Nickel catalyst prepared via glycine nitrate process for partial oxidation of methane to syngas

Methane Dry Reforming by Ni–Cu Nanoalloys Anchored on Periclase-Phase MgAlO x Nanosheets for Enhanced Syngas Production

Overcoming the kinetic and deactivation limitations of Ni catalyst by alloying it with Zn for the dry reforming of methane

Highly-stable Ni–Zn catalyst on USY zeolite support for low temperature methane pyrolysis

Enhanced sintering resistance of bimetal/SBA-15 catalysts with promising activity under a low temperature for CO methanation

Boosting hydrogen production from steam reforming of glycerol via constructing moderate metal-support interaction in Ni@Al2O3 catalyst