Abstract:To make a further investigation into the mass-transfer mechanism of distillation in rotating packed beds (RPBs), an improved mass-transfer model based on liquid-droplet flight, liquid-droplet impingement, and gas turbulence in a pilot-scale concentric ring rotating bed (CRRB) is developed from Li’s mass-transfer model of distillation. The CCRB belongs to a type of RPB. Total reflux distillation experiments are carried out in a pilot-scale CCRB using the ethanol–water system. With the improved model and experimental data, radial distributions of liquid-droplet flying and impinging mass-transfer coefficients, local liquid- and gas-side mass-transfer coefficients, and overall volumetric gas-side mass-transfer coefficient in the rotor and casing are obtained. The improved model can accurately describe the actual mass transfer occurring in the pilot-scale CRRB. It is found that the liquid-droplet flying mass transfer has a significant contribution to the liquid-side mass transfer, and there exist gas-side end zones with excellent mass-transfer efficiency at the inner periphery of the rotor and in the casing. The total reflux distillation of the pilot-scale CRRB is basically gas-side-controlled. Also, experiments of measuring liquid distribution at the outer periphery of the pilot-scale CCRB rotor are conducted by capturing liquid trajectories on paperboards. Results show that a good and uniform liquid distribution exists at the outer periphery of the rotor, which results from the existence of the tangential slip velocity of liquid on the inner wall of the concentric ring in the pilot-scale CRRB. The improved mass-transfer model that reveals the mass-transfer mechanism of RPB distillation will significantly facilitate the industrial application of RPB in distillation.

Advances in design, scale and operability of the Rotating Liquid Sheet (RLS) contactor: Pressure drop, flood-point and mass transfer – comparison to random packing

CFD Simulation for Up Flow Jet-Loop Reactors by Use of Bi-Dispersed Bubble Model

Mixing Effects on the Gas Flow and Mass Transfer in a Vertical Single Helical Ribbon Agitated Reactor for Propylene Polymerization

Study on Absorption Performance at High Liquid Loads using a Novel Random Packing: Super Mini Ring

Liquid-solid mass transfer in a rotating packed bed reactor with structured foam packing

Redirecting liquid momentum in rotating-packed-bed midway packing to enhance gas–liquid mass transfer: Modelling and application based on liquid-capture mechanism in end-effect zone

On Liquid Flow Maldistribution through Investigation of Random Open-Structure Packings

3D CFD simulation of the liquid flow in a rotating packed bed with structured wire mesh packing

Power-efficient mass transfer of a novel pulsating multi-packed bed liquid - liquid extractor

Computational fluid dynamic simulation of gas-liquid flow in rotating packed bed: A review

Gas/Liquid Operations in the Taylor-Couette Disc Contactor: Continuous Chemisorption of CO2

Radially Layered Configuration for Improved Performance of Packed Bed Reactors

Gas-Liquid Mass Transfer Characteristics in a Rotating-Drum Bioreactor

Distributor Effects on Liquid Hold-Up in Rotating Packed Beds

Studies on a New Random Packing—Plum Flower Mini Ring

Experimental Measurement and Numerical Simulation for Liquid Flow Velocity and Local Phase Hold-Ups in the Riser of a GLSCFB

Improved Mass-Transfer Model for Distillation in a Pilot-Scale Concentric Ring Rotating Bed as a Rotating Packed Bed

Liquid-liquid flow pattern and mass transfer in a rotating millimeter channel reactor

Investigation of countercurrent flow profile and liquid holdup in random packed column with local CFD data

Research, Development and Industrial Application of New Rotating Disc Contactor

CFD Simulation of Dry Pressure Drop in a Cross-Flow Rotating Packed Bed