Abstract:To make a further investigation into the mass-transfer mechanism of distillation in rotating packed beds (RPBs), an improved mass-transfer model based on liquid-droplet flight, liquid-droplet impingement, and gas turbulence in a pilot-scale concentric ring rotating bed (CRRB) is developed from Li’s mass-transfer model of distillation. The CCRB belongs to a type of RPB. Total reflux distillation experiments are carried out in a pilot-scale CCRB using the ethanol–water system. With the improved model and experimental data, radial distributions of liquid-droplet flying and impinging mass-transfer coefficients, local liquid- and gas-side mass-transfer coefficients, and overall volumetric gas-side mass-transfer coefficient in the rotor and casing are obtained. The improved model can accurately describe the actual mass transfer occurring in the pilot-scale CRRB. It is found that the liquid-droplet flying mass transfer has a significant contribution to the liquid-side mass transfer, and there exist gas-side end zones with excellent mass-transfer efficiency at the inner periphery of the rotor and in the casing. The total reflux distillation of the pilot-scale CRRB is basically gas-side-controlled. Also, experiments of measuring liquid distribution at the outer periphery of the pilot-scale CCRB rotor are conducted by capturing liquid trajectories on paperboards. Results show that a good and uniform liquid distribution exists at the outer periphery of the rotor, which results from the existence of the tangential slip velocity of liquid on the inner wall of the concentric ring in the pilot-scale CRRB. The improved mass-transfer model that reveals the mass-transfer mechanism of RPB distillation will significantly facilitate the industrial application of RPB in distillation.

Research, Development and Industrial Application of New Rotating Disc Contactor

Hydrodynamics and Mass Transfer Performance of a Modified Rotating Disc Contactor (MRDC)

Hydrodynamics And Mass Transfer Performance In A Modified Rotating Disc Contactor

Progress on agitated apparatus for polymer devolatilization and its CFD simulation

Physical Modelling and Numerical Simulation of Velocity Fields in Rotating Disc Contactor Via Cfd Simulation and Ldv Measurement

Numerical Simulation and Experimental Investigation of Velocity Fields in a Rotating Disc Contactor

Study on velocity fields of rotating disc contactor with different scales by computational fluid dynamics

Film Formation in a Horizontal Twin-Shaft Rotating Disk Reactor for Polymer Devolatilization

Study on Flow Field in Capacity Regulating Actuator for Reciprocating Compressor

Theoratical study on scaling up of a rotating disc contactor (RDC)

Study on Hydrodynamics and Mass Transfer Characteristic of a New Gas-liquid Reactor

CFD simulation of liquid flow characteristics in a rotor-stator spinning disc reactor

A Disc-Type Magneto-Rheologtic Fluid Damper

Development and Performance of a New Annular Centrifugal Contactor for Semi‐Industrial Scale

CFD Simulations of the Air/Water Two-phase Flow in an Annular Centrifugal Contactor

Improved Mass-Transfer Model for Distillation in a Pilot-Scale Concentric Ring Rotating Bed as a Rotating Packed Bed

Analysis of flow field characteristics of the three-dimensional staggered rotor and its influence on structural parameters in the wiped film molecular distillation

Visual study on the characteristics of liquid and droplet in a novel rotor-stator reactor

Simulation Investigation on the Flow and Mixing in Ducts of the Rotary Energy Recovery Device

Advances in design, scale and operability of the Rotating Liquid Sheet (RLS) contactor: Pressure drop, flood-point and mass transfer – comparison to random packing

Determination of the Liquid Hold-Up Volume and the Interface Radius of an Annular Centrifugal Contactor Using the Liquid-Fast-Separation Method