Experimental Measurement and Numerical Simulation for Liquid Flow Velocity and Local Phase Hold-Ups in the Riser of a GLSCFB

Changqing Cao,Mingyan Liu,Jianping Wen,Qingjie Guo

DOI: https://doi.org/10.1016/j.cep.2008.04.004

2009-01-01

Abstract:A gas–liquid–solid three-phase circulating fluidized bed (GLSCFB) with 0.15m in diameter and 4.35m in height was employed to investigate the local phase hold-ups and liquid flow velocity. With styrene resin (dp=1.45mm, ρs=1264kg/m3) as solid phases, air as gas phase, and carboxymethyl cellulose sodium as liquid phase, local phase hold-ups are measured simultaneously by micro-conductivity probe technique under a wide range of operation conditions. Liquid flow velocity measurements have been performed using the electrolyte tracer measurement (ETM) technique. Measurement results in a GLSCFB riser presented here give an insight into the distribution laws of the local phase hold-ups and liquid velocity in radial directions. A closed Eulerian/Eulerian/Lagrangian model (E/E/L model) for simulating gas–liquid–solid three-phase local flow properties was developed by combining Two Fluid Model (TFM) and District Element Method (DEM). This model was based on the fundamental equations of fluid mechanics. The motion of particles was described in the Lagrangian co-ordinates, while the gas phase and the liquid phase were described within the Eulerian co-ordinates. Based on IPSA and PSIC solution techniques, the program of simulating gas–liquid–solid local flow properties was achieved. The numerical simulating results of local phase hold-ups and local radial liquid velocity agreed well with the experimental data in a GLSCFB riser, and the applicability and reliability of this model were validated.