Abstract:A series of Ag nanoparticles (NPs) supported on three-dimensionally ordered macroporous (3DOM) La0.6Sr0.4MnO3 (yAg/3DOM La0.6Sr0.4MnO3; y = 0, 1.57, 3.63, and 5.71 wt %) were successfully prepared with high surface areas (38.2-42.7 m(2)/g) by a facile novel reduction method using poly methacrylate colloidal crystal as template in a dimethoxytetraethylene glycol (DMOTEG) solution. Physicochemical properties of these materials were characterized by means of numerous techniques, and their catalytic activities were evaluated for the combustion of methane. It is shown that the yAg/3DOM La0.6Sr0.4MnO3 materials possessed unique nanovoid-like 3DOM architectures, and the Ag NPs were well dispersed on the inner walls of macropores. Among the La1-xSrxMnO3 (x = 0.2, 0.4, 0.6, 0.8) and yAg/3DOM La0.6Sr0.4MnO3 (y = 0, 1.57, 3.63, and 5.71 wt %) samples, 3.63 wt % Ag/3DOM La0.6Sr0.4MnO3 performed the best, giving T-10%, T-50%, and T-90% (temperatures corresponding to methane conversion =10, 50, and 90%) of 361, 454, and 524 degrees C, respectively, and the highest turnover frequency (TOFAg) value of 1.86 x 10(-5) (mol/mol(Ag) s) at 300 degrees C. The apparent activation energies (39.1-37.5 kJ/mol) of the yAg/3DOM La0.6Sr0.4MnO3 samples were much lower than that (91.4 kJ/mol) of the bulk La0.6Sr0.4MnO3 sample. The effects of water vapor and sulfur dioxide on the catalytic activity of the 3.63 wt % Ag/3DOM La0.6Sr0.4MnO3 sample were also examined. It is concluded that its super catalytic activity was associated with its high oxygen adspecies concentration, good low-temperature reducibility, large surface area, and strong interaction between Ag and La0.6Sr0.4MnO3 as well as the unique nanovoid-walled 3DOM structure.

Properties of La0.9Sr0.1MnO3 and tourmaline compound catalytic materials for methane combustion

Effect of tourmaline additive on the crystal growth and activity of LaCoO3 for catalytic combustion of methane

Catalytic Behavior of Hydrothermally Synthesized La0.5Sr0.5MnO3 Single-Crystal Cubes in the Oxidation of CO and CH4

Effects of partial substitution of Cu by Mn and Co in LaCu0.5Ni0.5O3 catalyst synthesized by mechanochemical method in the total oxidation of methane

Structural Insight into La0.5Ca0.5Mn0.5Co0.5O3 Decomposition in the Methane Combustion Process

Catalytic combustion of methane over various perovskite-type oxides

Effect of Jahn−Teller Distortion in La0.5Sr0.5MnO3 Cubes and Nanoparticles on the Catalytic Oxidation of CO and CH4

Effect of Cu Doping on the Structure and Catalytic Activity of LaMnO_3 Catalyst

Effect of Tourmaline Addition on the Catalytic Performance and SO2 Resistance of NixMn3−xO4 Catalyst for NH3-SCR Reaction at Low Temperature

Three-Dimensionally Ordered Macroporous La0.6Sr0.4MnO3 Supported Ag Nanoparticles for the Combustion of Methane

Catalytic performance of La–Ce–O mixed oxide for combustion of methane

Catalytic performance of rare earth nanometer materials LaMnO3+lambda

Facile One-Step Flame Synthesis of La1−xSrxMnO3 Nanoparticles for CO Catalytic Oxidation

Enhanced activity and stability of La-doped CeO2 monolithic catalysts for lean-oxygen methane combustion

Mesoporous zirconia nanobelts: Preparation, characterization and applications in catalytical methane combustion

The microstructure and methane catalytic combustion of ceria composite materials modified with tourmaline particles

Effect of MnO2 Morphology on Its Catalytic Performance in Lean Methane Combustion

Correlation Cataluminescence (ctl) Property with Reactivity of Hydrothermally Synthesized La0.8sr0.2mno3 Cubes and Ctl As A Rapid Mode of Screening Catalyst

Chemical synthesis of La0.7Sr0.3MnO3/silica homogeneous nanocomposites

Pseudo core-shell LaCoO3@MgO perovskite oxides for high performance methane catalytic oxidation

Chemical synthesis of La0.7Sr0.3MnO3/silica homogenous nanocomposites