Abstract:In view of the flue gas characteristics of cement kilns in China, the development of low-temperature denitrification catalysts with excellent anti-poisoning performance has important theoretical and practical significance. In this work, a series of MnCeOx@TiO2 and tourmaline-containing MnCeOx@TiO2-T catalysts was prepared using a chemical pre-deposition method. It was found that the MnCeOx@TiO2-T2 catalyst (containing 2% tourmaline) exhibited the best low-temperature NH3-selective catalytic reduction (NH3-SCR) performance, yielding 100% NOx conversion at 110 °C and above. When 100–300 ppm SO2 and 10 vol.% H2O were introduced to the reaction, the NOx conversion of the MnCeOx@TiO2-T2 catalyst was still higher than 90% at 170 °C, indicating good anti-poisoning performance. The addition of appropriate amounts of tourmaline can not only preferably expose the active {001} facets of TiO2 but also introduce the acidic SiO2 and Al2O3 components and increase the content of Mn4+ and Oα on the surface of the catalyst, all of which contribute to the enhancement of reaction activity of NH3-SCR and anti-poisoning performance. However, excess amounts of tourmaline led to the formation of dense surface of catalysts that suppressed the exposure of catalytic active sites, giving rise to the decrease in catalytic activity and anti-poisoning capability. Through an in situ DRIFTS study, it was found that the addition of appropriate amounts of tourmaline increased the number of Brønsted acid sites on the catalyst surface, which suppressed the adsorption of SO2 and thus inhibited the deposition of NH4HSO4 and (NH4)2HSO4 on the surface of the catalyst, thereby improving the NH3-SCR performance and anti-poisoning ability of the catalyst.

Effect of tourmaline additive on the crystal growth and activity of LaCoO3 for catalytic combustion of methane

Properties of La0.9Sr0.1MnO3 and tourmaline compound catalytic materials for methane combustion

The microstructure and methane catalytic combustion of ceria composite materials modified with tourmaline particles

Effect of Tourmaline Addition on the Anti-Poisoning Performance of MnCeOx@TiO2 Catalyst for Low-Temperature Selective Catalytic Reduction of NOx

The effect of tourmaline on the denitration performance of MnOx/TiO2 catalysts and DFT calculation

Effects of partial substitution of Cu by Mn and Co in LaCu0.5Ni0.5O3 catalyst synthesized by mechanochemical method in the total oxidation of methane

Enhanced activity and stability of La-doped CeO2 monolithic catalysts for lean-oxygen methane combustion

Catalytic Behavior of Hydrothermally Synthesized La0.5Sr0.5MnO3 Single-Crystal Cubes in the Oxidation of CO and CH4

Effect of Tourmaline Addition on the Catalytic Performance and SO2 Resistance of NixMn3−xO4 Catalyst for NH3-SCR Reaction at Low Temperature

Nanocasted Synthesis of the Mesostructured LaCoO3 Perovskite and Its Catalytic Activity in Methane Combustion.

Catalytic performance of La–Ce–O mixed oxide for combustion of methane

Component regulation in novel La-Co-O-C composite catalyst for boosted redox reactions and enhanced thermal stability in methane combustion

Promotion effect of different lanthanide doping on Co/Al2O3 catalyst for dry reforming of methane

Effect of Cu Doping on the Structure and Catalytic Activity of LaMnO_3 Catalyst

Partial oxidation of methane to synthesis gas over Co/Ca/Al2O3 catalysts

Lattice Distortion in Co3O4/Mn3O4-Guided Synthesis via Carbon Nanotubes for Efficient Lean Methane Combustion

Tailoring Pd/M@CoAlO Core-Shell Catalyst Morphology for Efficient Methane Oxidation

Investigation on the Catalytic Combustion of CO over LaMn 1‐ X Cu X O 3 Promoted by Acid Treatment

Pseudo core-shell LaCoO3@MgO perovskite oxides for high performance methane catalytic oxidation

Structural Insight into La0.5Ca0.5Mn0.5Co0.5O3 Decomposition in the Methane Combustion Process

Correlation Cataluminescence (ctl) Property with Reactivity of Hydrothermally Synthesized La0.8sr0.2mno3 Cubes and Ctl As A Rapid Mode of Screening Catalyst