Abstract:In this study, xCuO-CeO2 mixed oxide catalysts (Cu weight ratio x = 1.5, 3, 4.5, 6 and 15 wt.%) were prepared using solution combustion synthesis (SCS) and their catalytic activities towards the methane (CH4) oxidation reaction were studied. The combustion synthesis of the pure CeO2 and the CuO-CeO2 solid solution catalysts was performed using copper and/or cerium nitrate salt as an oxidizer and citric acid as a fuel. A variety of standard techniques, including scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), thermo-gravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy were employed to reveal the microstructural, crystal, thermal and electronic properties that may affect the performance of CH4 oxidation. The CuO subphase was detected in the prepared solid solution and confirmed with XRD and Raman spectroscopy, as indicated by the XRD peaks at diffraction angles of 35.3° and 38.5° and the Ag Raman mode at 289 cm−1, which are characteristics of tenorite CuO. A profound influence of Cu content was evident, not only affecting the structural and electronic properties of the catalysts, but also the performance of catalysts in the CH4 oxidation. The presence of Cu in the CeO2 lattice obviously promoted its catalytic activity for CH4 catalytic oxidation. Among the prepared catalysts, the 6% CuO-CeO2 catalyst demonstrated the highest performance, with T50 = 502 °C and T80 = 556 °C, an activity that is associated with the availability of a fine porous structure and the enhanced surface area of this catalyst. The results demonstrate that nanocrystalline copper-ceria mixed oxide catalysts could serve as an inexpensive and active material for CH4 combustion.

The microstructure and methane catalytic combustion of ceria composite materials modified with tourmaline particles

Soot Combustion Performance and H2-TPR Study on Ceria-Based Mixed Oxides

Typical Crystal Face Effects of Different Morphology Ceria on the Activity of Pd/CeO2 Catalysts for Lean Methane Combustion

Effect of tourmaline additive on the crystal growth and activity of LaCoO3 for catalytic combustion of methane

The effects of ceria morphology on the properties of Pd/ceria catalyst for catalytic oxidation of low-concentration methane

Catalytic Combustion of Methane over Cerium-Doped Cobalt Chromite Catalysts

Properties of La0.9Sr0.1MnO3 and tourmaline compound catalytic materials for methane combustion

Study on synthesis and modification of Ti/Ce composite oxide

Catalytic Combustion of VOCs on Pt/CuMnCe and Pt/CeY Honeycomb Monolithic Catalysts

Generalized and High Temperature Synthesis of a Series of Crystalline Mesoporous Metal Oxides Based Nanocomposites with Enhanced Catalytic Activities for Benzene Combustion

High Thermal Stability of Ceria-Based Mixed Oxide Catalysts Supported on ZrO2 for Toluene Combustion

In-situ Synthesis of Monolithic Cu-Mn-Ce/cordierite Catalysts Towards VOCs Combustion

Catalytic performance of La–Ce–O mixed oxide for combustion of methane

Embedding Ultrafine and High-Content Pt Nanoparticles at Ceria Surface for Enhanced Thermal Stability.

Methane Combustion and TPR/TPO Properties of Pd/Ce_xZr_(1-x)O_2/Al_2O_3 Catalysts

Preparation of mesoporous nanocrystalline tetragonal zirconia for catalytic methane combustion

Combustion Synthesis of Zirconium-Doped Ceria Nanocatalyst

Combustion Synthesis of Non-Precious CuO-CeO2 Nanocrystalline Catalysts with Enhanced Catalytic Activity for Methane Oxidation

The Effect of the Presence of Ceria on the Character of Tio2 Mesoporous Films Used As Pt Catalyst Support for Methanol Combustion at Low Temperature

Enhanced thermal stability of lean methane combustion by structural interactions of CeO 2 with Pt/3DOM LaFeO 3 catalysts

Ceria engineering in nickel catalysts to improve CH 4 selectivity and yield for CO methanation