Abstract:In this study, xCuO-CeO2 mixed oxide catalysts (Cu weight ratio x = 1.5, 3, 4.5, 6 and 15 wt.%) were prepared using solution combustion synthesis (SCS) and their catalytic activities towards the methane (CH4) oxidation reaction were studied. The combustion synthesis of the pure CeO2 and the CuO-CeO2 solid solution catalysts was performed using copper and/or cerium nitrate salt as an oxidizer and citric acid as a fuel. A variety of standard techniques, including scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), thermo-gravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy were employed to reveal the microstructural, crystal, thermal and electronic properties that may affect the performance of CH4 oxidation. The CuO subphase was detected in the prepared solid solution and confirmed with XRD and Raman spectroscopy, as indicated by the XRD peaks at diffraction angles of 35.3° and 38.5° and the Ag Raman mode at 289 cm−1, which are characteristics of tenorite CuO. A profound influence of Cu content was evident, not only affecting the structural and electronic properties of the catalysts, but also the performance of catalysts in the CH4 oxidation. The presence of Cu in the CeO2 lattice obviously promoted its catalytic activity for CH4 catalytic oxidation. Among the prepared catalysts, the 6% CuO-CeO2 catalyst demonstrated the highest performance, with T50 = 502 °C and T80 = 556 °C, an activity that is associated with the availability of a fine porous structure and the enhanced surface area of this catalyst. The results demonstrate that nanocrystalline copper-ceria mixed oxide catalysts could serve as an inexpensive and active material for CH4 combustion.

In-situ Synthesis of Monolithic Cu-Mn-Ce/cordierite Catalysts Towards VOCs Combustion

Influence of Ce/Nb Molar Ratios on Oxygen-Rich CexNb1-xO4+δ Materials for Catalytic Combustion of VOCs in the Process of Polyether Polyol Synthesis

Catalytic Combustion of VOCs on Pt/CuMnCe and Pt/CeY Honeycomb Monolithic Catalysts

Facile and Flexible Preparation of Highly Active CuCe Monolithic Catalysts for VOCs Combustion

Ceramic Monolith Supported Mn–Ce–M Ternary Mixed-Oxide (m=cu, Ni or Co) Catalyst for VOCs Catalytic Oxidation

Generalized and High Temperature Synthesis of a Series of Crystalline Mesoporous Metal Oxides Based Nanocomposites with Enhanced Catalytic Activities for Benzene Combustion

Synergistic effects in Mn-Co mixed oxide supported on cordierite honeycomb for catalytic deep oxidation of VOCs

Novel metallic electrically heated monolithic catalysts towards VOC combustion

Cu-Mn-Ce ternary mixed-oxide catalysts for catalytic combustion of toluene

Cerium–Copper–Manganese Oxides Synthesized via Solution Combustion Synthesis (SCS) for Total Oxidation of VOCs

Performance of an Aliovalent-Doping MnCeO X /cordierite Monolithic Catalyst Derived from MOFs for O -Xylene Oxidation

Preparation of M-W-Mn/SiO2/cordierite monolithic catalysts and their performances for oxidative coupling of methane

Combustion Synthesis of Non-Precious CuO-CeO2 Nanocrystalline Catalysts with Enhanced Catalytic Activity for Methane Oxidation

Interface-Enhanced Oxygen Vacancies of CoCuOx Catalysts In Situ Grown on Monolithic Cu Foam for VOC Catalytic Oxidation

The catalytic combustion of VOCs over copper catalysts supported on cerium-modified and zirconium-pillared montmorillonite

Synthesis of Mesoporous CeO2-MnOx Binary Oxides and Their Catalytic Performances for CO Oxidation

Toluene Catalytic Combustion over Copper Modified Mn0.5Ce0.5 Ox Solid Solution Sponge-Like Structures

Properties And Coating Effect Of Nano-Powder Of Ce-Mn-O For Vocs Catalysts

Cu-Mn-Ce Mixed Oxides Catalysts for Soot Oxidation and Their Mechanistic Chemistry

Non-thermal plasma synthesis of supported Cu-Mn-Ce mixed oxide catalyst towards highly improved catalytic performance for volatile organic compound oxidation

Nanoporous CeO2-Decorated Cu-SmMn2O5 Composite Mullite Oxide Catalyst for Toluene Oxidation