Abstract:The increasing use of natural gas as an efficient, reliable, affordable, and cleaner energy source, compared with other fossil fuels, has brought the catalytic CH4 complete oxidation reaction into the spotlight as a simple and economic way to control the amount of unconverted methane escaping into the atmosphere. CH4 emissions are a major contributor to the ‘greenhouse effect’, and therefore, they need to be effectively reduced. Catalytic CH4 oxidation is a promising method that can be used for this purpose. Detailed studies of the activity, oxidative thermal aging, and the time-on-stream (TOS) stability of pristine La1−xSrxMnO3 perovskites (LSXM; X = % substitution of La with Sr = 0, 30, 50 and 70%) and iridium-loaded Ir/La1−xSrxMnO3 (Ir/LSXM) perovskite catalysts were conducted in a temperature range of 400–970 °C to achieve complete methane oxidation under excess oxygen (lean) conditions. The effect of X on the properties of the perovskites, and thus, their catalytic performance during heating/cooling cycles, was studied using samples that were subjected to various pretreatment conditions in order to gain an in-depth understanding of the structure–activity/stability correlations. Large (up to ca. 300 °C in terms of T50) inverted volcano-type differences in catalytic activity were found as a function of X, with the most active catalysts being those where X = 0%, and the least active were those where X = 50%. Inverse hysteresis phenomena (steady-state rate multiplicities) were revealed in heating/cooling cycles under reaction conditions, the occurrence of which was found to depend strongly on the employed catalyst pre-treatment (pre-reduction or pre-oxidation), while their shape and the loop amplitude were found to depend on X and the presence of Ir. All findings were consistently interpreted, which involved a two-term mechanistic model that utilized the synergy of Eley–Rideal and Mars–van Krevelen kinetics.

Catalytic combustion of methane over various perovskite-type oxides

Catalytic oxidation of NO with O2 over Pt/γ-Al2O3 and La0.8Sr0.2MnO3

Catalytic oxidation over lanthanum-transition metal perovskite materials

Oxygen desorption and oxidation-reduction kinetics with methane and carbon monoxide over perovskite type metal oxide catalysts

Total Oxidation of Methane over the LaNi1−xMxO3 (M: Mn, Ag, Cu, Co) Perovskites

Oxidation of methane over Pd/mixed oxides for catalytic combustion

Catalytic CO2 Reforming of Methane over Perovskite Noble Metals

Improvement of CO Oxidation and CH4 Combustion by Pd and Pt Partial Substitution on LaMn0.5Cu0.5O3 Perovskite

Effects of partial substitution of Cu by Mn and Co in LaCu0.5Ni0.5O3 catalyst synthesized by mechanochemical method in the total oxidation of methane

Preparation and evaluation of the LaCu1-xNixO3 (x = 0, 0.1, 0.3, 0.5 and 0.7) perovskite catalysts for total oxidation of methane

Activation of Methane over Perovskite Catalysts

Pseudo core-shell LaCoO3@MgO perovskite oxides for high performance methane catalytic oxidation

Catalytic oxidation of methane over hexaaluminates and hexaaluminate-supported Pd catalysts

Catalytic Behavior of Hydrothermally Synthesized La0.5Sr0.5MnO3 Single-Crystal Cubes in the Oxidation of CO and CH4

Catalytic performance of La–Ce–O mixed oxide for combustion of methane

Pd/SmMn2O5 catalyst for methane combustion: efficient lattice oxygen and strong metal-support interaction

Investigation on the Catalytic Combustion of CO over LaMn 1‐ X Cu X O 3 Promoted by Acid Treatment

Catalytic combustion of methane over La2BCoO6 perovskites containing Ni, Cu and Fe: impact of B-sites on oxygen species and catalytic activity

Methane Catalytic Combustion under Lean Conditions over Pristine and Ir-Loaded La1−xSrxMnO3 Perovskites: Efficiency, Hysteresis, and Time-on-Stream and Thermal Aging Stabilities

Complete Oxidation of Methane on Co 3 O 4 -Sno 2 Catalysts

Evaluation of Three‐Dimensionally Ordered Macroporous LaFe &Lt;sub>1-X</sub>co <sub>x</sub>o <sub>3</sub> Perovskites and Their Performance for Catalytic Oxidation of Methane