Abstract:Efficient production of H 2 by combined (steam/CO 2 ; steam/O 2 ) reforming of CH 4 was comparatively studied over perovskite-derived promoted Ni catalysts. The process performance was improved by regulating the redox and structural properties of the LaNi 0.99 M 0.01 O 3 catalysts through promotion (M = Pt, Pd, Re, Mo, Sn). The catalysts were synthesized using the citrate sol–gel method, tested in combined reforming of methane and studied by X-ray fluorescence analysis, thermal analysis, N 2 adsorption, X-ray diffraction, electron microscopy, temperature-programed hydrogen reduction to elucidate the impact of catalyst properties on their activity and resistance to re-oxidation and formation of carbon deposits under reaction conditions. It was shown that LaNi 0.99 M 0.01 O 3 catalysts after calcination at 850 °C in air have a perovskite structure that was destroyed after reductive activation with formation of metal Ni o particles with an average size of ~ 25 nm on the surface of lanthanum oxide/hydroxide. The resistance to re-oxidation of Ni o particles depends on the type of promoter and is maximum in the case of M = Re. It was established that the type of promoter affects the conversion of reagents (CH 4 , CO 2 ) and the H 2 yield, which at 700 °C increases in the series of promoters Sn < Mo < Pt < Pd < Re in the case of steam/CO 2 reforming and Pt < Sn < Mo < Pd < Re with steam/O 2 reforming. The optimal composition of catalyst was identified: among the studied samples, LaNi 0.99 Re 0.01 O 3 is characterized by a higher specific surface area, average reduction ability and high resistance to re-oxidation and coking. At 850 °C it provides the H 2 yield of 95 and 50% at complete CH 4 conversion in steam/CO 2 and steam/O 2 reforming, respectively.

Catalytic CO2 Reforming of Methane over Perovskite Noble Metals

Effects of Noble Metals Doped on Mesoporous Laalni Mixed Oxide Catalyst and Identification of Carbon Deposit for Reforming Ch4 with Co2

Methane reforming to syngas over LaNi x Fe 1−x O 3 (0≤ x ≤1) mixed-oxide perovskites in the presence of CO 2 and O 2

CO2 Reforming of CH4 over Nickel and Cobalt Catalysts Prepared from La-Based Perovskite Precursors

Dry Reforming of Methane over Bimetallic Ni-Co Catalyst Prepared from La(CoxNi1-x)0.5Fe0.5O3 Perovskite Precursor: Catalytic Activity and Coking Resistance

A highly active Ni catalyst supported on Mg-substituted LaAlO3 for carbon dioxide reforming of methane

A Ni/perovskite catalyst with low metal content for CO2 reforming of methane

Efficient Hydrogen Production by Combined Reforming of Methane over Perovskite-Derived Promoted Ni Catalysts

Preparation, characterization, and catalytic performance comparison of Ni/LaBO3 and Ru‐Ni/LaBO3 (B = Al, Fe) for methane steam reforming to hydrogen production

Preparation and evaluation of the LaCu1-xNixO3 (x = 0, 0.1, 0.3, 0.5 and 0.7) perovskite catalysts for total oxidation of methane

Perovskite La-2(Nicu)O-4 Catalyst Precursors For Dry Reforming Of Methane: Effects Of Cu-Substitution On Carbon Resistance

Influences of Ni Content on the Microstructural and Catalytic Properties of Perovskite LaNixCr1−xO3 for Dry Reforming of Methane

Production of synthesis gas via methane reforming with CO2 on noble metals and small amount of noble-(Rh-) promoted Ni catalysts

LaMnO3-based Perovskite with In-Situ Exsolved Ni Nanoparticles: a Highly Active, Performance Stable and Coking Resistant Catalyst for CO2 Dry Reforming of CH4

Catalytic combustion of methane over various perovskite-type oxides

La-based Perovskite Precursors Preparation and Its Catalytic Activity for CO2 Reforming of CH4

CO2 dry reforming of CH4 with Sr and Ni co-doped LaCrO3 perovskite catalysts

CO2‐Steam Bi‐Reforming of Methane Over La1−xSrxNi0.8Zr0.2O3 Perovskite Catalysts to Generate Hydrogen Rich Syngas

LaFe0.9Ni0.1O3 Perovskite Catalyst with Enhanced Activity and Coke-Resistance for Dry Reforming of Ethane

CO2 Reforming of CH4 over Rare Earth Elements Functionalized Mesoporous Ni–Ln (ln = Ce, La, Sm, Pr)–Al–O Composite Oxides

Propane Steam Reforming over Catalysts Derived from Noble Metal (Ru, Rh)-Substituted LaNiO3 and La0.8Sr0.2NiO3 Perovskite Precursors