Abstract:In this research, the earing characteristics of 6K21 aluminum alloy in circular cup deep drawing are investigated by virtue of experiments and multi-scale simulations including anisotropic Drucker, Hill48, Yld91 yield functions and crystal plastic finite element model (CPFEM). First, the deep drawing experiments of AA 6K21 are carried out to explore the influences of blank holding force (BHF) and blank diameter (BD) on earing profile and mechanical response. The user-defined material model subroutine is written for LS-DYNA explicit code, including constitutive model and ductile fracture criterion under associated or non-associated flow rule (NAFR). The parameters of the crystal plasticity model are calibrated by means of an optimization algorithm. Three yield functions under NAFR and CPFEM are used to predict earing in deep drawing simulation. The effects of five textures on the earing profiles and thickness variables are studied by CPFEM. The results demonstrate that the earing rate decreases slightly as the BHF increases. However, the mechanical response changes insignificantly. Moreover, as the BD increases, both the earing rate and mechanical response increase significantly. Considering computation accuracy and efficiency, the anisotropic Drucker function can accurately character the plastic deformation behavior of deep drawing. For five textures in CPFEM, Cube and Goss textures produce four ears at 0o and 90o from the rolling direction. Brass and S textures form six ears at 0o and 55o . Copper texture fabricates eight ears at 40o and 70o . The influences of five textures on earing rate are Goss > Cube > Copper > Brass > S. Furthermore, there are obvious thickness gradient fluctuations at the corner of the cup in Cube, Goss and Copper textures. It is expected to reduce the earing rate and improve the formability through reasonable allocations of experimental parameters and texture proportions.

Deformation-texture evolution in deep drawing of cold-rolled 3104 aluminum alloy sheet

Texture gradient in rough-rolled plate of aluminum alloy 3104 and its effect on annealing textures evolution after hot compression

Deformation and Recrystallization Textures in Straight-Rolled and Pseudo Cross-Rolled AA 3105 Aluminum Alloy

Multi-scale numerical investigation of deep drawing of 6K21 aluminum alloy by crystal plasticity and a stress-invariant based anisotropic yield function under non-associated flow rule

Evolution of texture and microstructure of 2E12 aluminum alloy during cold rolling and annealing

Relevance Between Microstructure and Texture During Cold Rolling of AA3104 Aluminum Alloy

Prediction of Earing in Textured Aluminium Sheets Based on Crystal Plasticity

Mechanical Anisotropy and Deep Drawing Behaviors of Az31 Magnesium Alloy Sheets Produced by Unidirectional and Cross Rolling

Microstructure and Texture Evolutions of Aa1050 Aluminum Alloy Cold Rolled to High Strains

Development of Microstructures and Texture During Cold Rolling in AA 7055 Aluminum Alloy

Recovery of heavily cold-rolled aluminum: Effect of local texture

Study of Texture in 6016 Aluminum Alloy During Processing

Crystal plasticity simulation on earing during deep drawing of AZ31 magnesium alloy

Texture Evolution of Al-Zn-Mg-Cu Aluminum Alloy Plate During Cold Rolling

Improved Mechanical Anisotropy and Texture Optimization of a 3xx Aluminum Alloy by Differential Temperature Rolling

Texture Evolution in an Al-Cu-Mg Alloy During Hot Rolling

Textures Variation of 3104 Aluminum Alloy Sheets under Different Rolling Conditions

Study of the deep drawing behavior and crystallographic texture of AA 3104-H19 aluminum alloy sheets

Through-Thickness Characterization of Microstructure and Texture in High Purity Aluminum Processed to High Strain by Accumulative Roll-Bonding

Evolution of Microstructure and Texture During Recovery and Recrystallization in Heavily Rolled Aluminum

Evolution of Microstructures and Textures of High Purity Aluminium During Rolling and Annealing