Abstract:Cubic boron nitride (cBN) with high hardness, thermal conductivity, wear resistance, and chemical inertness has become the most promising abrasive and machining material. Due to the difficulty of fabricating pure cBN body, generally, some binders are incorporated among cBN particles to prepare polycrystalline cubic boron nitride (PcBN). Hence, the binders play a critical factor to the performances of PcBN composites. In this study, the PcBN composites with three binder systems containing ceramic and metal phases were fabricated by spark plasma sintering (SPS) from 1400 to 1700 °C. The sintering behaviors and mechanical properties of the composites were investigated. Results show that the effect of binder formulas on mechanical properties mainly related to the compactness, mechanical performances, and thermal expansion coefficient of binder phases, which affect the carrying capacity of the composites and the bonding strength between binder phases and cBN particles. The PcBN composite with SiAlON phase as binder presented optimal flexural strength (465±29 MPa) and fracture toughness (5.62±0.37 MPa·m 1/2 ), attributing to the synergistic effect similar to transgranular and intergranular fractures. Meanwhile, the excellent mechanical properties can be maintained a comparable level when the temperature even rises to 800 °C. Due to the weak bonding strength and high porosity, the PcBN composites with Al 2 O 3 -ZrO 2 (3Y) and Al-Ti binder systems exhibited inferior mechanical properties. The possible mechanisms to explain these results were also analyzed.

Sintering of binderless cubic boron nitride and its modification by β-Si3N4 additive for hard machining applications

High pressure sintering behavior and mechanical properties of cBN-Ti 3Al and cBN-Ti 3Al-Al composite materials

Influence of binder systems on sintering characteristics, microstructures, and mechanical properties of PcBN composites fabricated by SPS

Sintering of Vitrified Bond CBN Grinding Tool

High Pressure and High Temperature Sintered PcBN Using Al, B4C and C as Sintering Additive

Preparation of superhard cubic boron nitride sintered from commercially available submicron powders

In situ synthesis of PcBN composites by Sialon combined with cBN-TiB2-AlN and their properties

Influence of Sintering Temperature on Structure and Mechanical Properties of Polycrystalline Cubic Boron Nitride Composites

High-pressure Synthesis of Tungsten Carbide–cubic Boron Nitride (wc–cbn) Composites: Effect of Cbn Particle Size and Volume Fraction on Their Microstructure and Properties

Effects of TiAl Alloy as a Binder on Cubic Boron Nitride Composites

High-pressure synthesis of Al<sub>2</sub>O<sub>3</sub>-cBN composites: Effect of thermodynamic condition and cBN volume fraction on their microstructure and properties

The effect of in-situ formed layered hBN on the machinability and mechanical properties of SPS sintered SiC

Experimental study on the influence of binders on plastic deformation during sintering of cubic boron nitride powder under high pressure and high temperature

Densification and mechanical properties of boron carbide prepared via spark plasma sintering with cubic boron nitride as an additive

Synthesis and characterization of cBN-Al2O3-Al cutting tool material by dual power spark plasma sintering

Wear behaviors of cubic boron nitride tools with various binders in high-speed turning of compacted graphite irons

Study of Machinable Silicon Carbide–boron Nitride Ceramic Composites

Preparation And Characterization Of Polycrystalline Cubic Boron Nitride (Pcbn) Compacts By A Pressureless Sintering Process

Microstructure and mechanical properties of AlN–hBN based machinable ceramics prepared by pressureless sintering

Reaction Sintering of Machinable TiB2-BN-C Ceramics with In-Situ Formed h-BN Nanostructure

Wear and friction analysis of cubic boron nitride tools with different binders in high-speed turning of nickel-based superalloys