Abstract:Cubic boron nitride (cBN) superabrasive grinding wheels exhibit unique advantages in the grinding of difficult-to-cut materials with high strength and toughness, such as titanium alloys and superalloys. However, grinding with multilayered metallic cBN superabrasive wheels faces problems in terms of grain wear resistance, the chip storage capability of the working layers and the stability and controllability of the dressing process. Therefore, in this work, novel metallic cBN superabrasive wheels with aggregated cBN (AcBN) grains and open pore structures were fabricated to improve machining efficiency and surface quality. Prior to the grinding trials, the air-borne abrasive blasting process was conducted and the abrasive blasting parameters were optimized in view of wear properties of cBN grains and metallic matrix materials. Subsequently, the comparative experiments were performed and then the variations in grinding force and force ratio, grinding temperature, tool wear morphology and ground surface quality of the multilayered AcBN grinding wheels were investigated during machining Ti–6Al–4V alloys. In consideration of the variations of grain erosion wear volume and material removal rate per unit of pure metallic matrix materials as the abrasive blasting parameters changes, the optimal abrasive blasting parameters were identified as the SiC abrasive mesh size of 60# and the abrasive blasting distance and time of 60 mm and 15 s, respectively. The as-developed AcBN grains exhibited better fracture toughness and impact resistance than monocrystalline cBN (McBN) grains because of the existence of metal-bonded materials amongst multiple cBN particles that decreased crack propagation inside whole grains. The metallic porous AcBN wheels had lower grinding forces and temperature and better ground surface quality than vitrified McBN wheels due to the constant layer-by-layer exposure of cBN particles in the working layer of the AcBN wheels.

Binderless Layered BN Toughened Cbn for Ultra-precision Cutting

Small onion-like BN leads to ultrafine-twinned cubic BN

Bi-layer cBN-based composites reinforced with oxide and non-oxide microfibers of refractory compounds

Preparation of Nanotwinned Cbn Cutting Edge by Combining Mechanical Lapping and Ion Beam Polishing

Hard and tough ultrafine-grained B4C-cBN composites prepared by high-pressure sintering

Wear study of CBN tools in laser ultrasonic composite cutting of cemented carbide

Cutting performance of cubic boron nitride-coated tools in dry turning of hardened ductile iron

High-pressure synthesis of Al<sub>2</sub>O<sub>3</sub>-cBN composites: Effect of thermodynamic condition and cBN volume fraction on their microstructure and properties

High-pressure Synthesis of Tungsten Carbide–cubic Boron Nitride (wc–cbn) Composites: Effect of Cbn Particle Size and Volume Fraction on Their Microstructure and Properties

Wear behaviors of cubic boron nitride tools with various binders in high-speed turning of compacted graphite irons

High-Pressure synthesis of Al2O3-cBN-hBN Self-lubricating ceramic

Research Progress of PcBN Materials and Cutting Tools

Preparation and toughness optimization of (AlCrSiN/TiN) 20 /Ti multilayer multiscale bionic tool coatings

Analysis of Mechanical Properties of Al2O3‐cBN‐hBN Composites and Identification of Main Influencing Factors

Tool Wear Characteristics of Binderless CBN Tools Used in High-Speed Milling of Titanium Alloys

Self-sharpening property of porous metal-bonded aggregated cBN wheels during the grinding of Ti–6Al–4V alloys

Origin of Superhard Pure PcBN: A Relation to the Fragment and Its Plastic Mechanism under the High Pressure

Design and fabrication of graded cBN tool materials through high temperature high pressure method

Cutting performance of the nanotwinned cBN tool in nano-cutting of Ni-Cr-Fe alloy

Grain erosion wear properties and grinding performance of porous aggregated cubic boron nitride abrasive wheels

Performance Assessment of Pcbn and Bcbn Tools in Machining of High-Chromium White Cast Iron