Abstract:This study deals with the effect of conventional sintering and microwave sintering on the densification kinetics of Titanium Carbide (TiC) in the presence of Ni (1, 1.5, 2 wt%). TiC compacts were obtained after uniaxial pressing of powders synthesised by ball milling of Titanium and Carbon and sintering was done in the presence of Nickel. The samples prepared were subjected to conventional as well as microwave sintering. The XRD and SEM analysis were used for a study of the reaction of Ti and C powders upon addition of Ni, which reduced the sintering temperature to 1200 °C. The densification of TiC powders was due to the Ti-Ni eutectic system, the liquid phase formed at this temperature assisting the sintering process. The SEM images revealed the flake like structure of TiC in which the carbon diffused into Ti upon the addition of Ni, thereby supporting enhanced mass transfer. The XRD pattern showed the presence of Titanium Oxide (TiO2) along with TiC which resulted in non-uniform distribution of hardness. Maximum hardness was achieved in the conventional sintered compacts which gradually increased with increase in Ni addition. The presence of the oxide phase and the formation of micro cracks resulted in non-uniform hardness for microwave sintered compacts. The maximum hardness of conventional sintered compact (375 HLD) was nearly 1.5 times more than the maximum hardness of the microwave sintered compact (250 HLD). The density of the microwave sintered compact was found to be higher by 8% than with the conventionally sintered compact.

Experimental study on the influence of binders on plastic deformation during sintering of cubic boron nitride powder under high pressure and high temperature

High pressure sintering behavior and mechanical properties of cBN-Ti 3Al and cBN-Ti 3Al-Al composite materials

Compressibility And Strength Of Nanocrystalline Tungsten Boride Under Compression To 60gpa

High-pressure Synthesis of Al2O3-cBN Composites: Effect of Thermodynamic Condition and Cbn Volume Fraction on Their Microstructure and Properties

High-pressure Synthesis of Tungsten Carbide–cubic Boron Nitride (wc–cbn) Composites: Effect of Cbn Particle Size and Volume Fraction on Their Microstructure and Properties

Preparation And Characterization Of Polycrystalline Cubic Boron Nitride (Pcbn) Compacts By A Pressureless Sintering Process

Effects of TiAl Alloy as a Binder on Cubic Boron Nitride Composites

Self-bonding mechanism of pure polycrystalline cubic boron nitride under high pressure and temperature

Preparation of superhard cubic boron nitride sintered from commercially available submicron powders

Sintering of binderless cubic boron nitride and its modification by β-Si3N4 additive for hard machining applications

Analysis of Mechanical Properties of Al2O3‐cBN‐hBN Composites and Identification of Main Influencing Factors

Investigation of TiC formation during ball-milling of elemental titanium and carbon

The Study on the Property and the Microstructure of Pressureless Sintered h-BN Ceramics

Sound velocities, elasticity and thermal properties of cBN composite with AlN binder at high pressure

Contribution of boundary non-stoichiometry to the lower-temperature plasticity in high-pressure sintered boron carbide

Effect of Al Ti content on mechanical properties of in-situ synthesized PcBN composites

In situ synthesis of PcBN composites by Sialon combined with cBN-TiB2-AlN and their properties

Effect of Y2O3 additive on properties of PCBN composites with TiN-Ti-AlN as binder by high temperature and high pressure sintering

High Pressure and High Temperature Sintered PcBN Using Al, B4C and C as Sintering Additive

A New High Pressure and High Temperature Synthesis Idea Preparation of Micron Polycrystalline Transparent Cubic Boron Nitride