Abstract:Through defect modulation, ZrB 2 powder was controllably synthesized using the carbon thermal reduction (CTR) method, with boron powder serving as a novel additive. Thermodynamic data for the ZrO 2 -B 2 O 3 -C system in the presence of boron were calculated using HSC thermodynamic software. Additionally, TG-DSC thermal analysis combined with XRD was used to investigate the reaction process. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) were used to analyze the defect structure and grain surface characteristics of the reaction products. The results indicate that the reaction of B with ZrO 2 and C exothermically alters the nucleation environment of ZrB 2 grains. The helical dislocations generated act as a source of crystal growth steps, promoting the growth of smooth interfaces and leading to a transformation of the ZrB 2 grain growth mechanism. Quantitative calculations of the dislocation density of ZrB 2 powders, using the convolutional multiple whole profile fitting (CMWP-fit), suggest that the inclusion of boron as an additive can modulate the defect concentration of the products. ZrB 2 powders with varied dislocation densities were achieved through meticulously controlled synthesis methods, followed by subsequent densification via hot pressing sintering. The results indicated that the relative density of ZrB 2 ceramics increased from 83.9 % to 96.7 % as the dislocation density of the powder increased from 2.7 × 10 13 m −2 to 7.6 × 10 14 m −2 with the rise in boron content from 0 wt% to 3 wt%. In addition, the defects create extra sintering-driving forces that induce a shift in the densification mechanism from grain boundary diffusion to dislocation slip during hot-pressing sintering. This shift results in an increase in the apparent activation energy from 105 kJ/mol to 210 kJ/mol.

Contribution of boundary non-stoichiometry to the lower-temperature plasticity in high-pressure sintered boron carbide

Sintering pure polycrystalline boron carbide bulks with enhanced hardness and toughness under high pressure

Influence of Length-Scale on Stabilization of Boron Carbide in Al-based Metal Matrix Composites During Plasma Activated Sintering

The Quasi-Plastic Deformation Mechanisms and Inverse Hall-Petch Relationship in Nanocrystalline Boron Carbide under Compression

Pressureless sintering of boron carbide ceramics with Al–Si additives

In Situ ZrB2 Formation in B4C Ceramics and Its Strengthening Mechanism on Mechanical Properties

Pressureless sintering and ablation behavior of PyC-Csf/ZrB2-SiC-ZrC ceramics doped with B4C

Progress in pressureless sintering of boron carbide ceramics – a review

Pseudo low-temperature sintering effect and microstructure evolution of SiBCO ceramics

Pressureless Sintering of Zirconium Diboride Ceramics with Boron Additive

Fabrication and characterization of hot-pressed B-rich boron carbide

Effects of boron source on properties of pressureless solid-state sintered silicon carbide ceramics

Microstructure and mechanical properties of pressure‐less sintered B4C–SiC–ZrB2–LaB6 ceramic composites

Defect-regulated synthesis of ZrB 2 powders via carbon thermal reduction and elucidation of its hot-pressing densification mechanism

Densification and grain growth kinetics of boron carbide powder during ultrahigh temperature spark plasma sintering

Experimental study on the influence of binders on plastic deformation during sintering of cubic boron nitride powder under high pressure and high temperature

Influence of Silicon Addition on the Sintering Behavior and Mechanical Properties of Boron Carbide by SPS Process

Multi-stage spark plasma sintering to study the densification mechanisms of boron carbide

Influence of sintering pressure on the crystallization and mechanical properties of BN-MAS composite ceramics

Strengthening Hf0.95Ta0.05B2 Ceramic With Ultrafine Grains and High-density Dislocations

Sintering mechanism of pure B4C ceramic prepared by hot oscillating pressing and with excellent mechanical properties