Abstract:As one of the most promising thermal protection materials, the ablation performance of SiC–ZrC ceramics is strongly influenced by thermal conductivity. In this work, the high thermal conductivity mesophase pitch-based carbon fibers (MPCFs) were uniformly added into a mixture of SiC and ZrC powders, which were pressureless sintered to form a MPCFs modified SiC–ZrC ceramics. The relationship between thermal conductivity and MPCFs content was investigated in detail. Both theoretical calculations and experimental results showed that the SiC–ZrC ceramics modified by adding 4.81 vol% MPCFs gained the highest thermal conductivity of 68.10±0.68 W/(m⋅K). The simulation shows that the temperatures at ablation center and backside of the ceramics were 1094 °C and 446 °C, respectively, after plasma ablation at 2300 °C for 20 s. And the actual backside temperature was detected to be 438 °C and that agreed with the simulation results. The high thermal conductivity leads to a lower ablation temperature because the heat is rapidly transferred from the high temperature part to the low region. Due to the low ablation temperature, the 4.81 vol% MPCFs modified SiC–ZrC ceramics exhibited the lowest mass ablation rate (−0.048±0.007 mg/s) and linear ablation rate (−0.715±0.056 μm/s). This research presents a novel insight for designing and fabricating excellent ablation-resistance ultra-high temperature ceramics (UHTCs).

Pressureless sintering and ablation behavior of PyC-Csf/ZrB2-SiC-ZrC ceramics doped with B4C

In Situ ZrB2 Formation in B4C Ceramics and Its Strengthening Mechanism on Mechanical Properties

Ablation Behavior and Mechanism of (Pyc-Csf)/zrb2-sic-zrc Ceramics Sintered by Reactive Spark Plasma Sintering at Low Temperature

The effect of transition metal carbides MeC (Me = Ti, Zr, Nb, Ta, and W) on mechanical properties of B4C ceramics fabricated via pressureless sintering

Microstructure and mechanical properties of pressure‐less sintered B4C–SiC–ZrB2–LaB6 ceramic composites

Processing and mechanical properties of B4C-SiCw ceramics densified by spark plasma sintering

B4C-based hard and tough ceramics densified via spark plasma sintering using a novel Mg2Si sintering aid

Pressureless sintering of boron carbide ceramics with Al–Si additives

Pressureless Sintering of Silicon Carbide Ceramics Containing Zirconium Diboride

Effect of Ti and its compounds on the mechanical properties and microstructure of B4C ceramics fabricated via pressureless sintering

Mechanical properties and pre-oxidation behavior of spark plasma sintered B4C ceramics using (Ti3SiC2+CeO2/La2O3) as sintering aid

Preparation of dense B4C ceramics by spark plasma sintering of high-purity nanoparticles

Preparation and flame ablation/oxidation behavior of ZrB2/SiC ultra-high temperature ceramic composites

Progress in pressureless sintering of boron carbide ceramics – a review

Microstructure and mechanical properties of spark plasma sintered SiC ceramics aided by B4C

The impact of Si3N4 incorporation on the mechanical characteristics of ZrB2-SiC nanocomposite sintered via pressureless method

Ablation behavior and mechanisms of 3D Cf/ZrB2-SiC composite applied in long-term temperature up to 2400 °C

Effects of high thermal conductivity chopped fibers on ablation behavior of pressureless sintered SiC–ZrC ceramics

High-performance B4C matrix composites fabricated from the B4C–Si–CeO2 system via reactive hot pressing

Pressureless sintered Al4SiC4 ceramics with Y2O3 addition

Novel (Zr, Ti)B2-(Zr, Ti)C-SiC ceramics via reactive hot pressing