Abstract:The effect of carbon contamination on the elemental beta boron (β-B) from the graphite components of spark plasma sintering (SPS) was investigated. The X-ray diffraction, analytical electron microscopy (AEM) and Raman spectroscopy witnessed boron carbide (B 13+x C 2-x where x=0.05-0.35), when SPS temperature was above 1750 °C. The degree of carbon contamination became severe with increasing SPS temperature to 1800 o C and 1850 o C and formed a single-phase rhombohedral boron carbide with about 12 wt.% of carbon. Our observations indicate that the carbon gets kinetically trapped into β-B to form boron carbide with a primitive unit cell consisting mainly of icosahedral B 11 C and three-atom chain of CBB configurations. After 6 months of natural aging, it has been revealed that boron carbide formed at and below sintering temperatures of 1800 °C is not a thermodynamically stable phase, and transformed reversibly to β-B structure. X-ray photoelectron spectroscopy ascertained that there are no longer B-C bonds and the existence of more C=C bonds in a 6 months aged specimen, suggesting carbon is no longer strongly bonded to boron, but precipitates as graphitic structure. Further examination using atom probe tomography and AEM confirmed the existence of carbon nanoclusters within grains and high concentration of carbon segregating onto grain boundaries. The phase transformation of boron carbide to mostly boron resulted in a significant loss of hardness and modulus in a bulk SPS specimen. This study underscores the importance of solid solution and local bonding environment in icosahedral boron-rich solids for phase stability and sustained properties.

Multi-stage spark plasma sintering to study the densification mechanisms of boron carbide

Densification and grain growth kinetics of boron carbide powder during ultrahigh temperature spark plasma sintering

Continuum Modeling of B4C Densification During Spark Plasma Sintering

Influence of Length-Scale on Stabilization of Boron Carbide in Al-based Metal Matrix Composites During Plasma Activated Sintering

Densification and mechanical properties of boron carbide prepared via spark plasma sintering with cubic boron nitride as an additive

Densification and strengthening mechanism in spark plasma sintering of B4C–VB2 ceramics via carbide boronizing

Novel approach of the evaluation of electric current density during the spark plasma sintering: Effect on the densification mechanisms of B4C-based ceramics

Preparation of dense B4C ceramics by spark plasma sintering of high-purity nanoparticles

Numerical Simulation of Physical Fields during Spark Plasma Sintering of Boron Carbide

Densification mechanism, microstructure and mechanical properties of ZrC ceramics prepared by high-pressure spark plasma sintering

Microstructure and mechanical properties of spark plasma sintered SiC ceramics aided by B4C

Influence of Silicon Addition on the Sintering Behavior and Mechanical Properties of Boron Carbide by SPS Process

Processing and Mechanical Properties of Zirconium Diboride‐Based Ceramics Prepared by Spark Plasma Sintering

Microstructure and mechanical behaviour of transient liquid phase spark plasma sintered B4C–SiC–TiB2 composites from a B4C–TiSi2 system

Carbon contamination of elemental beta-boron promoted a stable boron carbide by spark plasma sintering

Influence of CNTs on the Sintering Behavior and Mechanical Properties of Boron Carbide by SPS Process

New Progress in the Preparation of Sintering and Application of Boron Carbide Ceramics

Fabrication and characterization of hot-pressed B-rich boron carbide

Processing and mechanical properties of B4C-SiCw ceramics densified by spark plasma sintering

The Effect of CNTs on the Spark Plasma Sintering Densification Behavior and Mechanical Properties of B4C-Si Powders

Effect of Tungsten Carbide on Densification and Mechanical Properties of Silicon Nitride Ceramics by Spark Plasma Sintering