Abstract:To reduce the negative effects of the long-time and B2O3 phase on the traditional sintering process for B4C-based composite ceramics, nearly fully dense B4C–VB2 composite ceramics were prepared by reactive spark plasma sintering (SPS) technology at 2000 °C with B and V8C7 powders as raw materials in this paper. The effects of the degassing time during SPS on the microstructure and the mechanical properties of the final products were investigated in detail. The results revealed that the proper degassing time was beneficial for the vent of B2O3 during the sintering process, which refined the grain size, promoted densification and improved the mechanical properties of the composite ceramic. However, the redundant degassing time increased the holding time at high temperature, resulting in abnormal grain growth and mechanical performance deterioration. In the present work, the optimal degassing time was 6 min, and the final product prepared under the above conditions exhibited excellent comprehensive performance with a relative density of 99.2%, Vickers hardness of 31.2 GPa, bending strength of 654 MPa and fracture toughness of 5.7 MPa m1/2. In addition, the strengthening and toughening mechanisms of the products were mainly attributed to the residual thermal stresses and bridging structure caused by the fine B4C and VB2 grains distributed uniformly.

Sintering mechanism of pure B4C ceramic prepared by hot oscillating pressing and with excellent mechanical properties

Hot oscillatory pressing of B 4 C ceramics for improving densification and mechanical properties

Sintering behavior and mechanical properties of β-SiC ceramics under oscillatory pressure

Microstructures and mechanical properties of B4C‐SiC and B4C‐SiC‐TiB2 ceramic composites fabricated by hot pressing

Sintering pure polycrystalline boron carbide bulks with enhanced hardness and toughness under high pressure

Preparation of dense B4C ceramics by spark plasma sintering of high-purity nanoparticles

Densification and grain growth kinetics of boron carbide powder during ultrahigh temperature spark plasma sintering

Oscillatory pressure sintering of binderless tungsten carbide

Study on the Performance for Silicon Carbide Ceramics by Hot-pressing Sintering

Effect of TiB2 particles on microstructure and mechanical properties of B4C–TiB2 ceramics prepared by hot pressing

Interplay of microstructure and mechanical properties of WC-6Co cemented carbides by hot oscillating pressing method

Microstructure and mechanical properties of TiB2–B4C ceramics fabricated by hot-pressing

Processing and mechanical properties of B4C-SiCw ceramics densified by spark plasma sintering

Fabrication and characterization of hot-pressed B-rich boron carbide

Densification and strengthening mechanism in spark plasma sintering of B4C–VB2 ceramics via carbide boronizing

Effect of the Addition of Carbon on the Sintering Properties of Boron Carbide Ceramics Prepared by Pressureless Sintering

Densification mechanism, microstructure and mechanical properties of ZrC ceramics prepared by high-pressure spark plasma sintering

Microstructure and mechanical properties of spark plasma sintered SiC ceramics aided by B4C

High-performance B4C-YB4 composites fabricated with Y2O3 additive via hot-pressing sintering

In Situ ZrB2 Formation in B4C Ceramics and Its Strengthening Mechanism on Mechanical Properties

Hot pressed SiC ceramics employing polymer-derived SiBCN as sintering aid