Abstract:In this study, Spark Plasma Sintering (SPS) was utilized to fabricate fine-grained cemented carbides, and an orthogonal experimental design was employed to examine the influence of holding temperature (1100 °C, 1200 °C, 1300 °C) and holding time (5, 10, and 15 min) on the performance of WC-10Co cemented carbide specimens. Compared with conventional sintering methods, this work achieved the production of samples with enhanced overall performance at lower temperatures and shorter durations. Specifically, under the conditions of a holding temperature of 1300 °C and a holding time of 5 min, the resulting specimens exhibited a density of 14.64 g/cm3, a hardness of 91.29 HRA, a fracture toughness of 16.39 MPa·m½, and a transverse rupture strength of 2398 MPa. The microstructural analysis revealed that as the holding temperature increased, the Co phase in the specimens underwent a transformation from its initial powder form to banded cobalt and subsequently to slit-shaped cobalt. It was found that the presence of banded cobalt effectively hinders crack propagation, whereas slit-shaped cobalt is more effective in preventing crack initiation, thus impacting the overall performance of the specimens. By analyzing the sintering curves and microstructures, the densification mechanisms during SPS sintering of WC-Co cemented carbides were elucidated. The study concluded that the state changes of the Co phase play a significant role in the densification behavior, final microstructure, and properties of the sintered material. These findings offer valuable insights for understanding and optimizing the SPS process.

Interplay of microstructure and mechanical properties of WC-6Co cemented carbides by hot oscillating pressing method

Oscillatory Pressure Sintering: A New Method for Preparing WC-Co Cemented Carbides

Microstructure and properties of coarse WC-10CoCrFeMnNi cemented carbide by mechanical alloying and hot pressing sintering

Microstructure and mechanical properties of oscillatory pressure sintered WC ceramics with different carbon sources

Preparation of WC-Co Cemented Carbide by Spark Plasma Sintering: Microstructure Evolution, Mechanical Properties and Densification Mechanism

Oscillatory pressure sintering of binderless tungsten carbide

Ultrafine WC-Co cemented carbide with enhanced mechanical properties prepared by oscillating sinter forging

Hot oscillatory pressing of B 4 C ceramics for improving densification and mechanical properties

Coarse-grained WC–6Co hardmetals with dual-scale and plate-like WC structures fabricated by convention powder metallurgy process

Sintering mechanism of pure B4C ceramic prepared by hot oscillating pressing and with excellent mechanical properties

In-Situ Synthesization of WC-6Co Cemented Carbides by SPS

Effect of Cold Isostatic Pressing and VC Grain Growth Inhibitor Addition on WC Grain Size and Mechanical Properties of WC-8Co Cemented Carbide

Promising WC-30WB-10Co Cemented Carbide Coating with Improved Density and Hardness Deposited by High Velocity Oxy-Fuel Spraying: Microstructure and Mechanical Properties

Sintering of the WC-6%Co cemented carbides for improved mechanical and cutting performance using Micro-FAST

Influence of sintering temperature on microstructure and properties of 90W-10Ti alloy targets prepared by hot oscillating pressing

Oscillating pressure sintered W-Cu refractory alloy with high density and hardness under lower temperature

Sintering behavior of alumina whisker reinforced zirconia ceramics in hot oscillatory pressing

Sintering behavior and mechanical properties of β-SiC ceramics under oscillatory pressure

Hot oscillatory pressure sintered W–Ni–Fe refractory alloy under different sintering pressures: Microstructures, densification behavior and properties

Effect of Metal Elements on Microstructure and Mechanical Properties of Ultrafine Cemented Carbide Prepared by SPS

Ultrafine‐grained WC‐based Ceramics Prepared Via Two‐step Oscillatory Pressure Sintering