Abstract:Boron carbide (B4C) matrix composites had the advantages of high hardness, high melting point and low density. However, due to the low relative density and poor fracture toughness of B4C, its comprehensive properties were limited in engineering applications. In this work, in order to improve the comprehensive properties of B4C composites, B4C–SiC–SiB6–CeB6 composites were designed and fabricated via reactive hot pressing at 2050 °C and 20 MPa with B4C matrix and novel additives (Double doping of Si and CeO2) as raw materials. The effects of additive CeO2 content on the microstructures and mechanical properties of composite were investigated, and reaction mechanisms of B4C, Si and CeO2 at different temperatures were studied in detail. The work showed that liquid phase Si and SiB6 greatly improved the densification of composites. CeB6 played an indispensable role in the formation of SiC–SiB6 agglomerate structure, increasing strength and supplementing toughness. When the content of CeO2 was 6 wt%, the relative density, hardness, flexural strength and fracture toughness reached to 99.7%, 34.9 GPa, 461.46 MPa and 5.57 MPa m1/2, respectively. Our strategy benefited from the formation of two liquid phases and SiC–SiB6 agglomerate structure, showing great potential in promoting sintering and improving fracture toughness.

Hot oscillatory pressing of B 4 C ceramics for improving densification and mechanical properties

Sintering mechanism of pure B4C ceramic prepared by hot oscillating pressing and with excellent mechanical properties

Sintering behavior and mechanical properties of β-SiC ceramics under oscillatory pressure

Interplay of microstructure and mechanical properties of WC-6Co cemented carbides by hot oscillating pressing method

Sintering behavior of alumina whisker reinforced zirconia ceramics in hot oscillatory pressing

Microstructures and mechanical properties of B4C‐SiC and B4C‐SiC‐TiB2 ceramic composites fabricated by hot pressing

A Novel Oscillatory Pressure-Assisted Hot Pressing For Preparation Of Highperformance Ceramics

Microstructure and Mechanical Properties of B4C - C Ceramic

The Effect of B4C on the Microstructure and Thermo-Mechanical Properties of HfB2-based Ceramics

Effect of Oscillatory Pressure on the Sintering Behavior of ZrO2 Ceramic

Effect of TiB2 particles on microstructure and mechanical properties of B4C–TiB2 ceramics prepared by hot pressing

Reactive Hot Pressing and Mechanical Properties of B4C/Li2O–Al2O3–SiO2 Composites

Enhanced Toughness and Reliability of Si3N4-SiCw Composites under Oscillatory Pressure Sintering

Improved Mechanical Properties of Al2O3-25 Vol% SiCw Composites Prepared by Oscillatory Pressure Sintering

Hot-pressing of BeO Ceramics and Its Thermal Conductivity and Flexural Strength

Oscillatory Pressure Sintering: A New Method for Preparing WC-Co Cemented Carbides

Fabrication and characterization of hot-pressed B-rich boron carbide

An Oscillatory Pressure Sintering of Zirconia Powder: Densification Trajectories and Mechanical Properties

Microstructure and mechanical properties of TiB2–B4C ceramics fabricated by hot-pressing

High-performance B4C matrix composites fabricated from the B4C–Si–CeO2 system via reactive hot pressing

Preparation of dense B4C ceramics by spark plasma sintering of high-purity nanoparticles