Abstract:Polycrystalline diamond composites (PDC) have been used as a cutting material in a multitude of fields, from mechanical processing to oil and gas drilling. In this study, PDC samples were prepared under high pressure and high temperature (HPHT) conditions within a pressure interval of 5.5 to 10.5 GPa by sintering diamond powder (average grain size ~3 μm) with WC-10 wt% Co substrate. Samples obtained with varying sintering pressures and temperatures were characterized using Vickers hardness tester, scanning electron microscopy (SEM) and X-ray diffraction (XRD). The results revealed that: (1) within a specified material system, each distinct sintering pressure condition corresponds to a unique optimal sintering temperature that yields the pinnacle of consolidation efficiency in samples. This optimal temperature exhibits a linearly increasing trend with rising sintering pressure; (2) at the intersection where the sintering pressure attains its optimal match with temperature, an increase in pressure fosters more intimate contact and stronger inter-grain bonding among diamond particles, thus amplifying the DD bond formation effect, which consequently leads to a linear enhancement in the Vickers hardness values of PDC with increasing sintering pressure; (3) simultaneously, under conditions of optimal temperature matching, elevating the sintering pressure notably decreases the cobalt content within the polycrystalline diamond layer of PDC samples. These findings furnish crucial experimental evidence for optimizing PDC material properties, significantly contributing to the advancement of both theoretical exploration and technological innovation within the field, carrying profound academic value and practical guidance implications.

High hardness and high fracture toughness B4C-diamond ceramics obtained by high-pressure sintering

Nanostructured Diamond-Tic Composites with High Fracture Toughness

Hard and tough ultrafine-grained B4C-cBN composites prepared by high-pressure sintering

Effect of TiB_2 content on microstructure and mechanical properties of in-situ fabricated TiB_2/B_4C composites

High pressure sintering behavior and mechanical properties of cBN-Ti 3Al and cBN-Ti 3Al-Al composite materials

High-pressure Synthesis of Tungsten Carbide–cubic Boron Nitride (wc–cbn) Composites: Effect of Cbn Particle Size and Volume Fraction on Their Microstructure and Properties

The improvement mechanism of mechanical properties of B4C ceramics by constructing core‐shell powders

Enhancement mechanical properties of in-situ preparated B4C-based composites with small amount of (Ti3SiC2+Si)

High-performance B4C matrix composites fabricated from the B4C–Si–CeO2 system via reactive hot pressing

Microstructures and mechanical properties of B4C‐SiC and B4C‐SiC‐TiB2 ceramic composites fabricated by hot pressing

High-pressure synthesis of Al<sub>2</sub>O<sub>3</sub>-cBN composites: Effect of thermodynamic condition and cBN volume fraction on their microstructure and properties

Structure and mechanical properties of hot-pressed B4C-NdB6 composites

Microstructure and mechanical properties of B4C matrix composites prepared via hot-pressing sintering with Pr6O11 as additive

Microstructure and mechanical properties of TiB2–B4C ceramics fabricated by hot-pressing

Synthesis and Characterization of NanoComposite Superhard Materials

Effect of pressure on sintering behavior of polycrystalline diamond

B4C‒TiB2 composite with modified microstructure and enhanced properties from optimal size coupling of raw powders

Microstructure and mechanical properties of B4C–TiB2 ceramic composites prepared via a two-step method

Microstructure and mechanical properties of pressure‐less sintered B4C–SiC–ZrB2–LaB6 ceramic composites

Microstructure and mechanical behaviour of transient liquid phase spark plasma sintered B4C–SiC–TiB2 composites from a B4C–TiSi2 system

High-performance B4C-YB4 composites fabricated with Y2O3 additive via hot-pressing sintering