Abstract:A ZW-126/D2000-40 type single-break vacuum circuit breaker (VCB) with controlled switching technology is designed and produced in this paper. The results of type tests based on IEC and GB standards are presented. A 126 kV single-break vacuum interrupter (VI) with 3/4 coil axial magnetic field (AMF) contacts is used in the VCB, which can interrupt short currents of 40 kA. The external insulation of the VI is provided by SF6 at 0.1 MPa. In order to match the 126 kV single-break VI and controlled switching device, a long-stroke electro-magnetic force actuator (EMFA) with 16 kN closing holding force and 3.5 m/s average opening speed is designed. Moreover, a position tracking controlled switching device based on closed-loop control using the technology of a fuzzy control algorithm and pulse width modulation is applied to the controlled switching device. This device is applied to control the coil current of EMFA and the electromagnetic force, so as to control the EMFA to follow the ideal position curve. The type tests of 126 kV VCB are all passed according to the IEC62271-100 and GB1984-2014, including dielectric tests, basic short-circuit tests, short-line fault tests, out-of-phase tests, etc. The strong capacitive current breaking capacity and mechanical strength of the VCB are proved by the capacitive current switching test of class C2, electrical endurance test of class E2 and mechanical endurance test of class M2. The electromagnetic compatibility (EMC) tests are passed according to the IEC61000-4. The controlled switching test of capacitive current was successful according to IEC62271-302 and GB/T30846-2014, and the controlled switching accuracy is less than ± 0.5 ms. The test results show that the VCB has excellent performance, which has broad application prospects in special occasions at a 126 kV voltage level, such as a switching capacitor and no-load transformer, etc.

Working principle and testing technology of circuit breaker closing resistor for 1100kV GIS

Study on Applicability of Circuit Breaker Closing Resistance in EHV and UHV AC Systems

Research on the Replacement of Circuit Breaker in 550 kV GIS

Hybrid Mechanical-Static Dc Circuit Breaker And Dc Breaking

Study on Switching Over-voltage and Its Restrictions in UHVAC System

Statistical analysis of switching overvoltages in UHV transmission lines with a controlled switching

Electrical-thermal coupling characteristics of pre-insertion resistors in AC filter circuit breaker for UHV grid

Simulation Study On The Control Valve In Hydraulic Operating Mechanism Of The High Voltage Circuit Breaker

Advanced method for the insertion time of the closing resistor based on the pre-breakdown characteristics

A Novel Bidirectional Nonuniform Hybrid Circuit Breaker Considering Different Direction Protection Requirements

Experiment Researches on Cold State Dielectric Recovery Characteristics in High Voltage SF6 Circuit Breakers

DC switching overvoltage of ± 1100 kV UHVDC converter station

Study on VFTO of AC Ultra-high Voltage GIS Substation

On the Relationship Between Internal Pressure and Permittivity in the Interrupter of VCB

Comparative Study on Measures to Limit Load-Rejection Opening Overvoltage of Long-Distance and Large-Capacity UHVAC Transmission Lines

Elimination of closing resistors for breakers in 1000-kV UHV system by surge arresters

Development and Application of a 10 Kv Mechanical DC Circuit Breaker

Current Status of Testing and Research on Circuit Breaker Mechanical Performance and Arc Extinction

Fundamental tests for 550 kV SF6 synchronous circuit breaker

Simulation Research on the Post-arc Dielectric Recovery Characteristics of Multi-break Vacuum Circuit Breakers

Development and type test of ZW-126/D2000-40 vacuum circuit breaker with controlled switching technology