Abstract:The direct current circuit breakers are considered a promising option to protect the transmission line against commonly appearing line-to-ground fault. However, the challenges of losses in the nonoperational stage, escalation of response against fault current, and large fault current handling capability remain the debatable issues for direct current circuit breakers. This paper introduces a novel topology of the hybrid circuit breaker with fault-current-limiting characteristics, which contains three branches: the main branch, fault-current-limiting branch, and energy absorption branch. The main branch includes a mechanical switch, breaker impedance, and bidirectional power electronics switches. In the fault-current-limiting branch, a fault-current-limiting circuit is introduced which contains n numbers of bidirectional switches and current-limiting inductors, which are connected in series to make the design modular in nature. During the normal working stage, the current flows through the main branch of the breaker. Once a fault in the system is confirmed, the fault current is transferred to the fault-current-limiting branch. At this stage, the intensity of the fault current is reduced significantly using the fault-current-limiting circuit, and finally, the residual current is shifted to the energy absorption branch. The working principle, design considerations, and parametric analysis concerning the design of hybrid circuit breakers are incorporated in this paper. The performance of the proposed breaker is evaluated using a three-terminal voltage-source converter-based high-voltage direct current transmission network; for this purpose, a PSCAD/EMTDC simulation tool is used. The performance of the proposed breaker is also compared with other topologies. The comparative analysis shows that the proposed breaker is a good alternative considering high fault current interruption requirements, response time against fault current, and power losses.

Hybrid Mechanical-Static Dc Circuit Breaker And Dc Breaking

A Scheme for Current-limiting Hybrid DC Circuit Breaker

Thyristor Based Hybrid Arc-less High Voltage Direct Current Circuit Breaker

Hybrid MVDC Circuit Breaker Based on Enhanced Arc Voltage of Vacuum Interrupter

A Fast LVDC Vacuum Hybrid Circuit Breaker: Dielectric Recovery and Design Consideration

Medium and High Voltage DC Breaking Technology

A DC Hybrid Circuit Breaker with Buffer Capacitor and Vacuum Interrupters

Development and Application of a 10 Kv Mechanical DC Circuit Breaker

Current-transferring High Voltage DC Breaker

Topology, Control and Fault Analysis of a New Type HVDC Breaker for HVDC Systems

Research On Electromagnetic Transient Of Hybrid Dc Circuit Breaker For Dc Distribution Grid

Review of DC circuit breaker application

Technical Assessment on Self-Charging Mechanical HVDC Circuit Breaker

A Novel Bidirectional Nonuniform Hybrid Circuit Breaker Considering Different Direction Protection Requirements

Natural Commutation Type Hybrid DC Circuit Breaker Based on Hybrid Mechanical Gaps

A Hybrid Circuit Breaker with Fault Current Limiter Circuit in a VSC-HVDC Application

Overview of topology research on hybrid direct current circuit breakers

Research and Development of 500kv Hybrid HVDC Circuit Breaker with Current Commutation Drive Circuit

Research On A Novel Two-Stage Direct Current Hybrid Circuit Breaker

Investigation of DC Hybrid Circuit Breaker Based on High-Speed Switch and Arc Generator.

Research on the Breaking Branch for a Hybrid DC Circuit Breaker In±500 Kv Voltage‐sourced Converter High‐voltage Direct Current Grid