Abstract:Hybrid switching technologies such as zero voltage switching (ZVS) and zero current switching (ZCS) are widely accepted to protect DC power systems from different kinds of faults. However, in some cases such as the protection of DC generators in the electrical distribution system of modern ships, different protection strategies are needed for faults in different directions and both ZVS and ZCS technologies may be needed in one circuit breaker. This special protection requirement will lead to being more complicated in the bidirectional protection of the system and limits the application of the hybrid circuit breakers. Therefore, a novel bidirectional nonuniform hybrid circuit breaker based on a special combination of ZVS and ZCS technologies is proposed to simplify the overall topology of the circuit breaker. The proposed scheme can interrupt high rate-of-rise fault current in one direction by ZCS technology while interrupting short-circuit current in another direction with short-circuit short-delay strategy by ZVS technology. First, the topology and working principle of the proposed bidirectional nonuniform hybrid circuit breaker are introduced. Moreover, three current commutation processes involved in both directions of fault current interrupting are analysed to achieve the optimal connection structure. Furthermore, a high-speed driving mechanism of the vacuum interrupter (VI) based on the flexible conjunction of an electromagnetic repulsion (EMR) driver and a permanent magnetic (PM) system is introduced and the structure of the optimal connection is designed. Finally, the proposed topology of the hybrid circuit breaker is validated using a realistic 800 V/1600 A prototype. The short-circuit breaking off tests of both directions are conducted. The feasibility of the proposed scheme is verified with these tests.

Advanced method for the insertion time of the closing resistor based on the pre-breakdown characteristics

Study on Applicability of Circuit Breaker Closing Resistance in EHV and UHV AC Systems

Comparative Study on Measures to Limit Load-Rejection Opening Overvoltage of Long-Distance and Large-Capacity UHVAC Transmission Lines

Study on Switching Over-voltage and Its Restrictions in UHVAC System

Optimal Placement of Dynamic Reactive Power Compensation Devices for Improving Immunity to Commutation Failure in Multi-Infeed HVDC Systems

A Novel Adaptive Single-Phase Reclosure Scheme Using Dual-Window Transient Energy Ratio And Mathematical Morphology

A Novel Bidirectional Nonuniform Hybrid Circuit Breaker Considering Different Direction Protection Requirements

A Scheme for Current-limiting Hybrid DC Circuit Breaker

An Adaptive Reclosure Scheme for Parallel Transmission Lines with Shunt Reactors

Influence of Single-phase Reclosing Sequence upon Transient Stability Margin of AC/DC Hybrid Transmission System

Study on Inrush Current Restraining Technology when Energizing No-load Transformer

Overvoltage and insulation coordination for ±1100 kV UHVDC converter station

New Algorithm for Single-phase Adaptive Reclosure of EHV Transmission Lines with Shunt Reactor

Overvoltage Suppression Under Commutation Failure Based on Improved Voltage-Dependent Current Order Limiter Control Strategy

Solution and Its Key Issue Analysis for Load Transfer Without Power Interruption of Distribution Lines with 30°Phase Angle Difference

Analysis and Design of the High Current Rising Rate Hybrid DC Current Limiting Circuit Breaker

A Strategy of Adaptive Reclosure for AC Lines on the Inverter Side of AC/DC Hybrid Grid

An Adaptive Reclosing Scheme Based on Phase Characteristics for MMC-HVDC Systems

Working principle and testing technology of circuit breaker closing resistor for 1100kV GIS

Statistical analysis of switching overvoltages in UHV transmission lines with a controlled switching

Analysis and suppression of operational overvoltage and inrush current for high‐speed trains by automatic phase‐switching technique