Abstract:Due to its excellent electrical conductivity, high transparency in the visible spectrum, and exceptional chemical stability, indium tin oxide (ITO) has become a crucial material in the fields of optoelectronics and nanotechnology. This article provides a thorough analysis of growing ITO thin films with various thicknesses to study the impact of thickness on their electrical, optical, and physical properties for solar-cell applications. ITO was prepared through radio frequency (RF) magnetron sputtering using argon gas with no alteration in temperature or changes in substrate heating, followed with annealing in a tube furnace under inert conditions. An investigation of the influence of thickness on the optical, electrical, and physical properties of the films was conducted. We found that the best thickness for ITO thin films was 100 nm in terms of optical, electrical, and physical properties. To gain full comprehension of the impact on electrical properties, the different samples were characterized using a four-point probe and, interestingly, we found a high conductivity in the range of 1.8–2 × 106 S/m, good resistivity that did not exceed 1–2 × 10−6 Ωm, and a sheet resistance lower than 16 Ω sq−1. The transparency values found using a spectrophotometer reached values beyond 85%, which indicates the high purity of the thin films. Atomic force microscopy indicated a smooth morphology with low roughness values for the films, indicating an adequate transitioning of the charges on the surface. Scanning electron microscopy was used to study the actual thicknesses and the morphology, through which we found no cracks or fractures, which implied excellent deposition and annealing. The X-ray diffraction microscopy results showed a high purity of the crystals, as the peaks (222), (400), (440), and (622) of the crystallographic plane reflections were dominant, which confirmed the existence of the faced-center cubic lattice of ITO. This work allowed us to design a method for producing excellent ITO thin films for solar-cell applications.

Flexible two-dimensional indium tin oxide fabricated using a liquid metal printing technique

A Novel Strategy of Fabricated Flexible ITO Electrode by Liquid Metal Ultra-Thin Oxide Film

Flexible OLED fabrication with ITO thin film on polymer substrate

Monolithic Use of Inert Gas for Highly Transparent and Conductive Indium Tin Oxide Thin Films

Large-Scale, High-Transparency, Ultra-thin ITO Membranes with Robust Conductivity and Flexibility

Stretchable Substrates with 3D Wave Patterned Surface for Enhanced Mechanical Stability of Indium Tin Oxide Electrodes

High-performance ITO thin films for on-cell touch sensor of foldable OLED displays

Hypoeutectic Liquid Metal Printing of 2D Indium Gallium Oxide Transistors (Small 45/2024)

Low Reflectivity and High Flexibility of Tin-Doped Indium Oxide Nanofiber Transparent Electrodes.

Room-temperature fabrication of flexible oxide TFTs by co-sputtering of IGZO and ITO

Flexible ITO-Based TFTs on Paper Substrates

Hypoeutectic Liquid Metal Printing of 2D Indium Gallium Oxide Transistors

Low-Temperature and Solution-Processed Indium Tin Oxide Films and Their Applications in Flexible Transparent Capacitive Pressure Sensors

High Operation Frequency and Strain Tolerance of Fully Printed Oxide Thin Film Transistors and Circuits on PET Substrates

Nanometre-thin Indium Tin Oxide for Advanced High-Performance Electronics

Bi2O3 Doped Indium Tin Oxide Thin Films Fabricated Via Liquid Metal Printing

Flexible Organic Thin-Film Transistors with High Mechanical Stability on Polyimide Substrate by Chemically Plated Silver Electrodes

Stable Indium Tin Oxide with High Mobility

Towards integrated metatronics: a holistic approach on precise optical and electrical properties of Indium Tin Oxide

High-performance a-IGZO-based flexible TTFT with stacked dielectric layers via ultrathin high-κ SrTiO3 buffer layer grown on HfO2

Bendable metal oxide thin-film transistors and circuits for analog electronics applications