Abstract:Due to its excellent electrical conductivity, high transparency in the visible spectrum, and exceptional chemical stability, indium tin oxide (ITO) has become a crucial material in the fields of optoelectronics and nanotechnology. This article provides a thorough analysis of growing ITO thin films with various thicknesses to study the impact of thickness on their electrical, optical, and physical properties for solar-cell applications. ITO was prepared through radio frequency (RF) magnetron sputtering using argon gas with no alteration in temperature or changes in substrate heating, followed with annealing in a tube furnace under inert conditions. An investigation of the influence of thickness on the optical, electrical, and physical properties of the films was conducted. We found that the best thickness for ITO thin films was 100 nm in terms of optical, electrical, and physical properties. To gain full comprehension of the impact on electrical properties, the different samples were characterized using a four-point probe and, interestingly, we found a high conductivity in the range of 1.8–2 × 106 S/m, good resistivity that did not exceed 1–2 × 10−6 Ωm, and a sheet resistance lower than 16 Ω sq−1. The transparency values found using a spectrophotometer reached values beyond 85%, which indicates the high purity of the thin films. Atomic force microscopy indicated a smooth morphology with low roughness values for the films, indicating an adequate transitioning of the charges on the surface. Scanning electron microscopy was used to study the actual thicknesses and the morphology, through which we found no cracks or fractures, which implied excellent deposition and annealing. The X-ray diffraction microscopy results showed a high purity of the crystals, as the peaks (222), (400), (440), and (622) of the crystallographic plane reflections were dominant, which confirmed the existence of the faced-center cubic lattice of ITO. This work allowed us to design a method for producing excellent ITO thin films for solar-cell applications.

Stable Indium Tin Oxide with High Mobility

Development of Novel Tungsten-Doped High Mobility Transparent Conductive In2O3 Thin Films

Design and Fabrication of Indium Tin Oxide for High Performance Electro-Optic Modulators at the Communication Wavelength

High mobility tungsten-doped indium oxide (IWO) deposited by room-temperature RF sputtering in pure argon plasma

Insight into the High Mobility and Stability of In2 O3 :H Film

Fabrication and performance of indium oxide based transparent thin film transistors

Indium-Tin-Oxide for High-performance Electro-optic Modulation

Nanometre-thin Indium Tin Oxide for Advanced High-Performance Electronics

Towards integrated metatronics: a holistic approach on precise optical and electrical properties of Indium Tin Oxide

Large-Scale, High-Transparency, Ultra-thin ITO Membranes with Robust Conductivity and Flexibility

High mobility of IGO/IGZO double-channel thin-film transistors by atomic layer deposition

Oxide Heteroepitaxy for Flexible Optoelectronics.

Back-End-of-Line Compatible InSnO/ZnO Heterojunction Thin-Film Transistors With High Mobility and Excellent Stability

Thin Indium-Tin-Oxide Film Produced Through Sol–Gel Method with Its Morphological and Electrical Properties

Optimization Preparation of Indium Tin Oxide Nanoparticles via Microemulsion Method Using Orthogonal Experiment

Preparation and Properties of Indium Tin Oxide Films Deposited by Reactive Evaporation at Different Deposited Rate

Highly conductive transparent organic electrodes with multilayer structures for rigid and flexible optoelectronics

Monolithic Use of Inert Gas for Highly Transparent and Conductive Indium Tin Oxide Thin Films

Transparent electrodes for organic optoelectronic devices: a review

High Temperature Conductive Stability of Indium Tin Oxide Films

Low-cost Sn-doped indium oxide films with high mobility by reactive plasma deposition for silicon heterojunction solar cells