Abstract:Due to its excellent electrical conductivity, high transparency in the visible spectrum, and exceptional chemical stability, indium tin oxide (ITO) has become a crucial material in the fields of optoelectronics and nanotechnology. This article provides a thorough analysis of growing ITO thin films with various thicknesses to study the impact of thickness on their electrical, optical, and physical properties for solar-cell applications. ITO was prepared through radio frequency (RF) magnetron sputtering using argon gas with no alteration in temperature or changes in substrate heating, followed with annealing in a tube furnace under inert conditions. An investigation of the influence of thickness on the optical, electrical, and physical properties of the films was conducted. We found that the best thickness for ITO thin films was 100 nm in terms of optical, electrical, and physical properties. To gain full comprehension of the impact on electrical properties, the different samples were characterized using a four-point probe and, interestingly, we found a high conductivity in the range of 1.8–2 × 106 S/m, good resistivity that did not exceed 1–2 × 10−6 Ωm, and a sheet resistance lower than 16 Ω sq−1. The transparency values found using a spectrophotometer reached values beyond 85%, which indicates the high purity of the thin films. Atomic force microscopy indicated a smooth morphology with low roughness values for the films, indicating an adequate transitioning of the charges on the surface. Scanning electron microscopy was used to study the actual thicknesses and the morphology, through which we found no cracks or fractures, which implied excellent deposition and annealing. The X-ray diffraction microscopy results showed a high purity of the crystals, as the peaks (222), (400), (440), and (622) of the crystallographic plane reflections were dominant, which confirmed the existence of the faced-center cubic lattice of ITO. This work allowed us to design a method for producing excellent ITO thin films for solar-cell applications.

High-performance ITO thin films for on-cell touch sensor of foldable OLED displays

Flexible OLED fabrication with ITO thin film on polymer substrate

Large-Scale, High-Transparency, Ultra-thin ITO Membranes with Robust Conductivity and Flexibility

ITO/Ag/ITO Multilayer Polymer Films by Roll-to-Roll Process and Performance of Flexible OLED Devices

Flexible two-dimensional indium tin oxide fabricated using a liquid metal printing technique

Optical and electrical properties of ITO film on flexible fluorphlogopite substrate

Roll-to-Roll sputtered ITO/Cu/ITO multilayer electrode for flexible, transparent thin film heaters and electrochromic applications

Low-Temperature and Solution-Processed Indium Tin Oxide Films and Their Applications in Flexible Transparent Capacitive Pressure Sensors

A Novel Strategy of Fabricated Flexible ITO Electrode by Liquid Metal Ultra-Thin Oxide Film

High-performance a-IGZO-based flexible TTFT with stacked dielectric layers via ultrathin high-κ SrTiO3 buffer layer grown on HfO2

Study on ITO/Ag/ITO multilayer film as the electrode of organic light-emitting diodes

Monolithic Use of Inert Gas for Highly Transparent and Conductive Indium Tin Oxide Thin Films

Highly Bendable In-Ga-ZnO Thin Film Transistors by Using a Thermally Stable Organic Dielectric Layer

Ultrathin and Ultrasmooth Au Films As Transparent Electrodes in Ito-Free Organic Light-Emitting Devices

A Study of Thin Film Encapsulation on Improving Electrical Characteristics and Reliability for Flexible OLEDs

Ultra-flat ITO films on mica for high temperature transparent flexible electrodes

Effect of film thickness on the properties of indium tin oxide thin films

Foldable and washable textile-based OLEDs with a multi-functional near-room-temperature encapsulation layer for smart e-textiles

Room-temperature fabrication of flexible oxide TFTs by co-sputtering of IGZO and ITO

Reliable high temperature, high humidity flexible thin film encapsulation using Al2O3/MgO nanolaminates for flexible OLEDs

Nanolaminate‐Induced Mechanically and Environmentally Robust Al2O3/TiO2 Thin Film Encapsulation by Low‐Temperature Atomic Layer Deposition: Toward Flexible and Wearable OLEDs