Abstract:Ultrathin and continuous metallic films with mechanical robustness, high electrical conductivity and high elevated optical transparency are considered as ideal alternatives of the ITO electrodes. However, continuous and smooth morphology have not yet been simultaneously fully satisfied for making a rather thin metallic film. In this study, the atomic layer deposition (ALD) of copper ultrathin films was investigated at temperatures below 110 degrees C to obtain films used as transparent electrodes in flexible organic light-emitting devices with ITO-free electrode. During the process, ligand-exchange reaction of [Cu-(dmap)(2)] (dmap dimethylamino-2-propoxide) and diethyl zinc (Et2Zn) took place at the internal surface of the substrate at low temperatures. The data suggested that the deposition process at 110 degrees C followed an ideal self-limiting ALD fashion with a saturated growth rate of 0.022 nm/cycle. The resulting deposited Cu film with a thickness of 10 nm showed excellent surface morphology with a root-mean-square roughness value of 0.62 +/- 0.03 nm. This led to favorable optical properties with a transparency of 74% at 550 nm wavelength and good conductivity with a sheet resistance of 10.2 Omega sq(-1). The use of the flexible ultrathin Cu films as anodes on Polyethylene terephthalate (PET) in OLEDs yielded higher luminance values when compared to OLEDs with traditional ITO anodes. Furthermore, the electrodes could be bent at less than 5 mm bending radius. The relevant device efficiency and superior luminance of the flexible ultrathin Cu anodes look promising as alternatives to ITO in flexible electronics.

Ultrathin and Ultrasmooth Au Films As Transparent Electrodes in Ito-Free Organic Light-Emitting Devices

Ultrathin Au Electrodes Based on a Hybrid Nucleation Layer for Flexible Organic Light-Emitting Devices

Transparent Electrodes Based on Ultrathin/ultra Smooth Cu Films Produced Through Atomic Layer Deposition As New ITO-free Organic Light-Emitting Devices

Highly Flexible and Mechanically Robust Ultrathin Au Grid As Electrodes for Flexible Organic Light-Emitting Devices

Ultrathin Metal Films as the Transparent Electrode in ITO‐Free Organic Optoelectronic Devices

Fabrication and characterization of Ag film with sub-nanometer surface roughness as a flexible cathode for inverted top-emitting organic light-emitting devices.

Ultra-Smooth and Efficient NiO/Ag/NiO Transparent Electrodes for Flexible Organic Light-Emitting Devices

Highly Flexible Organic-Inorganic Hybrid Perovskite Light-Emitting Devices Based on an Ultrathin Au Electrode

Improved Efficiency of Indium-Tin-Oxide-Free Organic Light-Emitting Devices Using Pedot:Pss/Graphene Oxide Composite Anode

Epitaxial Ultrathin Au Films on Transparent Mica with Oxide Wetting Layer Applied to Organic Light-Emitting Devices

Study on ITO/Ag/ITO multilayer film as the electrode of organic light-emitting diodes

Interfacial Engineering of Ultrathin Metal Film Transparent Electrode for Flexible Organic Photovoltaic Cells

Silver/germanium/silver: An effective transparent electrode for flexible organic light-emitting devices

Smooth ZnO:Al-AgNWs Composite Electrode for Flexible Organic Light-Emitting Device

An Electrode Based on Ca:Au Alloy and Atomic Layer Deposition for a Transparent Flexible OLED Device

High-Efficiency, Large-Area And Color-Stable Flexible Organic Light-Emitting Diodes Using An Ultra-Thin Metal Electrode

Enhanced Efficiency of Organic Light-Emitting Devices by Using a Directly Imprinted Nanopillared Ultrathin Metallic Electrode.

Improved Color Purity of Green Oled Device Based on Au Thin Film

Highly transparent and conductive metal oxide/metal/polymer composite electrodes for high-efficiency flexible organic light-emitting devices

High-performance Flexible Organic Light-Emitting Diodes Using Embedded Silver Network Transparent Electrodes.

Flexible Light-Emitting Diodes Using Organometal Halide Perovskite with Ultrathin Au Electrode