Abstract:Organic light-emitting diodes (OLEDs) have become one of the mainstream lighting and display technologies. The vacuum thermal evaporation is the most widely adopted method for the preparation of organic and metal materials of OLEDs. The thermal deposition of the commonly used silver (Ag) and aluminum (Al) electrodes requires high temperature and long time, which greatly increases the cost of the fabricating process. Therefore, we selected silver oxide (Ag2O) powder instead of Ag pellets as the precursor for evaporating Ag electrodes. Compared to Ag pellets and Al wires, Ag2O-based Ag electrode need lower evaporation temperature and shorter preheating time. In addition, the agglomeration phenomenon on the surface of the Ag2O -based Ag film is prevented, which also increases the carrier concentration of Ag electrode. Moreover, by doping bathophenanthroline (Bphen) in Ag2O powders, the phenanthroline-metal (Bphen-Ag) complexes with higher electron mobility and stronger electron injecting ability can be achieved. We applied Ag2O-based Ag electrode and 10 wt.% Ag2O-based Ag:Bphen as electron injection layer to achieve high-efficiency red phosphorescent inverted OLEDs, with the maximum current efficiency, external quantum efficiency, and power efficiency of 17.79 cd/A, 20.71%, and 12.14 lm/W, respectively. This method provides a new strategy for preparing highly efficient inverted red OLED devices.

Fabrication and characterization of Ag film with sub-nanometer surface roughness as a flexible cathode for inverted top-emitting organic light-emitting devices.

Highly Flexible and Efficient Top-Emitting Organic Light-Emitting Devices with Ultrasmooth Ag Anode

Ultrathin and Ultrasmooth Au Films As Transparent Electrodes in Ito-Free Organic Light-Emitting Devices

Study on ITO/Ag/ITO multilayer film as the electrode of organic light-emitting diodes

Ultra-Smooth and Efficient NiO/Ag/NiO Transparent Electrodes for Flexible Organic Light-Emitting Devices

Highly Flexible Inverted Organic Solar Cells with Improved Performance by Using an Ultrasmooth Ag Cathode

Enhanced Efficiency of Organic Light-Emitting Devices with Corrugated Nanostructures Based on Soft Nano-Imprinting Lithography

Ultrathin Au Electrodes Based on a Hybrid Nucleation Layer for Flexible Organic Light-Emitting Devices

Optical calculation of transparency of Ag film cathode in top-emitting OLED application

Fabrication and Characterization of Organic Single Crystal‐Based Light‐Emitting Devices with Improved Contact Between the Metallic Electrodes and Crystal

High-Efficiency Microcavity Top-Emitting Organic Light-Emitting Diodes Using Silver Anode

Transparent ultrathin Ag nanomesh electrode fabricated by nanosphere lithography for organic light-emitting devices

Improved Efficiency of Indium-Tin-Oxide-Free Organic Light-Emitting Devices Using Pedot:Pss/Graphene Oxide Composite Anode

Study on low-temperature evaporation of Ag 2 O-based Ag electrode and electron injection layer and their application in OLEDs

Roll-to-roll fabrication of highly transparent Ca:Ag top-electrode towards flexible large-area OLED lighting application

Flexible Organic Light-Emitting Diodes with ITO/Ag/ITO Multi-Layers As Anodes

Efficient Top-Emitting Organic Light-Emitting Devices Using Fe3O4 Modified Ag Anode

ITO/Ag/ITO Multilayer Polymer Films by Roll-to-Roll Process and Performance of Flexible OLED Devices

Enhancement of Electron Injection in Organic Light-Emitting Devices Using an Ag/LiF Cathode

Interfacial Engineering of Ultrathin Metal Film Transparent Electrode for Flexible Organic Photovoltaic Cells

Enhanced Efficiency of Organic Light-Emitting Devices by Using a Directly Imprinted Nanopillared Ultrathin Metallic Electrode.