Abstract:Transparent conductive electrodes are one of the important components of organic optoelectronic devices. Mg:Ag alloys have been widely used as a semi-transparent cathode for top-emitting organic light-emitting diodes (OLEDs) or transparent OLEDs (TrOLEDs) due to their high conductivity and relatively low work function. However, their low transmittance makes the light-extraction efficiency to be comparatively low. In this study, a highly transparent (84.6% in the visible light range), conductive, laminated cathode with the structure of ZnO/Mg:Ag/ZnO was fabricated via atomic layer deposition (ALD). ALD-deposited ZnO is used to protect the vulnerable ultrathin Mg:Ag-alloy layer, while preserving its low work function for the entire structure. In particular, the bottom ZnO layer is used as an ETL, which can provide reasonable energy alignment between the cathode layer and the emission layer and prevent metal particles from penetrating into the underlying organic layer. The top-emission OLED, which is prepared in this study by using the laminated cathode, showed an 85.8% increase in brightness, with a current density of 11.2 mA/cm3 at 4.0 V, which is an ultra-low voltage compared with devices made with Mg:Ag cathodes. In addition, the total luminance of TrOLEDs increases 34.4% compared with devices using Mg:Ag cathodes. Furthermore, the average transmittance of the device was still as high as 77.19% for visible light.

High-Efficiency Microcavity Top-Emitting Organic Light-Emitting Diodes Using Silver Anode

Efficient Top-Emitting Organic Light-Emitting Devices Using Fe3O4 Modified Ag Anode

Highly Flexible and Efficient Top-Emitting Organic Light-Emitting Devices with Ultrasmooth Ag Anode

Highly Efficient Top-Emitting Organic Light-Emitting Devices with Aluminium Electrodes

Improved Light Outcoupling For Top-Emitting Organic Light-Emitting Devices

22.3: High Efficiency Electrophosphorescent Organic Light Emitting Diodes Using Semitransparent Ag As Anode

A green top-emitting organic light-emitting device with improved luminance and efficiency

Pure Aluminum As the Anode in Top Emission Oled

High-efficiency top-emitting organic light-emitting diodes based on metal/ITO composite electrodes

A Top-Emission Organic Light-Emitting Diode with a Silicon Anode and an Sm∕Au Cathode

Microcavity OLED using Ag electrodes

Investigation of Al- and Ag-Based Top-Emitting Organic Light-Emitting Diodes with Metal Oxides as Hole-Injection Layer

Efficiency Improvement of Phosphorescent Organic Light-Emitting Diodes Using Semitransparent Ag As Anode

Robust Laminated Anode with an Ultrathin Titanium Nitride Layer for High-Efficiency Top-Emitting Organic Light-Emitting Diodes

Dual side transparent organic light-emitting diodes with a modified Ag top cathode

Transparent organic light-emitting diodes based on Cs 2 CO 3 :Ag/Ag composite cathode

Fabrication of highly efficient blue top-emission organic light-emitting diodes on different reflective electrodes

A highly transparent laminated composite cathode for organic light-emitting diodes

High-Performance Top-Emitting White Organic Light-Emitting Devices

29.3: Very Bright and Efficient Top-Emitting OLED with Ultra-Thin Yb As Effective Electron Injector

Performance Optimization of Top-Emitting OLED Based on PEN Flexible Substrate with Microcavity