Abstract:1 Email: qiuy@tsinghua.edu.cn Abstract It is generally recognized that hole-transport layers (HTLs) with thickness on the order of tens nanometer are indispensable to high luminance and quantum efficiency in small molecule organic light-emitting diodes (OLEDs). However, in this work, without conventional HTLs, a thin polytetrafluoroethylene (Teflon) layer was introduced as hole-injection layer, followed by deposition of an emissive layer (EML), Alq3 doped with 0.7wt% DMQA. And simultaneously, a blocking and electron transport layer of aluminum (III) bis (2-methyl-8-quinolinato) 4-phenylphenolate (BAlq) ETL was employed to confine holes and excitons in Alq3 layer. The obtained OLEDs exhibited a luminance of over 88000 cd/m2 and external quantum efficiency of 5.4% (21.1 cd/A) at voltage of 19.8 V and current density of 418 mA/cm2. When the Teflon thickness was 10.0 nm under our conditions, well-balanced charge injection could be obtained in OLEDs. It was also found that the high performance was related to triplet-triple annihilation, in which triplet excited tris (8-hydroxyquinoline) aluminum (Alq3) excitons go through annihilative reactions with other Alq3 excitons to form singlet excited molecules. It provides a new way of obtaining highly efficient and stable OLEDs with well-balanced charge injection.

Investigation of Al- and Ag-Based Top-Emitting Organic Light-Emitting Diodes with Metal Oxides as Hole-Injection Layer

High-Efficiency Microcavity Top-Emitting Organic Light-Emitting Diodes Using Silver Anode

A green top-emitting organic light-emitting device with improved luminance and efficiency

Improved Light Outcoupling For Top-Emitting Organic Light-Emitting Devices

Efficient Top-Emitting Organic Light-Emitting Devices Using Fe3O4 Modified Ag Anode

A Green Top-Emitting Organic Light-Emitting Device with Single-Mode Resonance and Improved Performance by Using WO 3 Capping Layer

P-113: Novel Structure Organic Light-Emitting Diodes with High Performance

Influence of Different Hole Transport Layer on the Performance of Organic Light-Emitting Devices

Highly Efficient Top-Emitting Organic Light-Emitting Devices with Aluminium Electrodes

Low-voltage Top-Emitting Organic Light-Emitting Devices with an Organic Double-Heterojunction Structure

Improved Hole Injection And Transport Of Organic Light-Emitting Devices With An Efficient P-Doped Hole-Injection Layer

Novel phosphine oxide-based electron-transporting materials for efficient phosphorescent organic light-emitting diodes

P-113: Society for Information Display: Novel Structure Organic Light-emitting Diodes With High Performance

High-efficiency top-emitting organic light-emitting diodes based on metal/ITO composite electrodes

A Top-Emission Organic Light-Emitting Diode with a Silicon Anode and an Sm∕Au Cathode

Improved Performance of Alq(3)-based Organic Light-Emitting Diode with Multi-Layer Structure

Pure Aluminum As the Anode in Top Emission Oled

Highly Power Efficient Organic Light-Emitting Diodes Based on P-Doped and Novel N-Doped Carrier Transport Layers

Enhanced Hole Injection Characteristics of a Top Emission Organic Light-Emitting Diode with Pure Aluminum Anode

Single-layer Small Molecular Organic Light Emitting Diodes Without Hole Transport Layer

P-128: Inverted Top-Emitting Organic Light-Emitting Devices Using Vanadium Pentoxide as Anode Buffer Layer