Abstract:Organic electroluminescence is one of the most promising technology for next generation of flat panel display. Hole transporting layer represents the weakest link in the electroluminescent structure considering the thermal stability of the materials. The most widely used hole transporting material, N,N'-bis (1-naphthyl)-N, N'-diphenyl-1, 1'-biphenyl-4, 4'-diamine (NPB), has a glass transition temperature ( Tg) of 95℃, which is much lower than that of the electron transporting material, tris (8- hydroxyquinoline) aluminum (Alq3) . Based on the good hole transporting property and suitable energy level matched with other materials of NPB, two new hole transporting materials: N, N'-bis(1-naphthyl)- N,N'-di(4-methylphenyl)-1,1'-biphenyl-4, 4'-diamine (NTB) and N, N'-bis(1-naphthyl)-N, N'-di(4- tert-butylphenyl)-1, 1'-biphenyl-4, 4'-diamine (NBB) were synthesized by introducing methyl and tert- butyl groups into NPB to improve its thermal stability. The glass transition temperature (Tg) of NTB and NBB measured by DSC are 108℃ and 129℃ respectively, showing better thermal stability than that of NPB. The ionization energy obtained by ultraviolet photoemission spectroscopy is 5. 2eV for all of NPB and its derivatives. The emission peak in the photoluminescent spectra of the solid films of NTB and NBB are at 455nm and 460nm, which are close to the emission peak of NPB at 440nm. The organic electroluminescent devices using NPB, NTB and NBB as hole transporting layer (HTM) were fabricated with the structure of ITO/CuPc(20nm)/HTM(50nm)/Alq3(60nm)/LiF(0.5nm)/Al(100nm). The emission spectra of the three devices are the same and the green color light was emitted from the Alq3 layer. The turn-on voltages of the devices are 11, 9, 8V for NPB, NTB and NBB, respectively. The brightness of the devices at 15V are 1 000, 1 300, 1 200cd/m2 for NPB, NTB and NBB. The devices with NTB and NBB also show better longevity than that of NPB in a prelimin ary test.

Influence of Different Hole Transport Layer on the Performance of Organic Light-Emitting Devices

Analysis on Mechanism of Current Transport in Organic Electroluminescent Thin Film Device

Influence of the hole transport layer on the performance of organic light-emitting diodes

Improved Hole Injection And Transport Of Organic Light-Emitting Devices With An Efficient P-Doped Hole-Injection Layer

P-113: Society for Information Display: Novel Structure Organic Light-emitting Diodes With High Performance

P-113: Novel Structure Organic Light-Emitting Diodes with High Performance

Material design of hole transport materials capable of thick-film formation in organic light emitting diodes

Synthesis of Thermal Stable Organic Hole Transporting Materials for Use in Electroluminescent Devices

Studies on the Performances of Blue Organic Electroluminescent Device with Different Electron Transport Layers

Improving the Performance of Solution-processed OLED by High Triplet Energy Hole Transport Layer

Effect of Hole Transport Layers on the Performance of Organic Optoelectronic Devices based on PBDB-T:ITIC Bulk Heterojunction

Investigating the Effect of the Conductivity of the Electron Transportation Layer on the Organic Light-Emitting Diodes

Perovskite Light-Emitting Devices with Doped Hole Transporting Layer

Role of Hole Playing in Improving Performance of Organic Light-Emitting Devices with an Al2o3 Layer Inserted at the Cathode-Organic Interface

Dependence of the Performance of the Organic Electroluminescent Devices Upon the Deposition Rate of Organic Thin Films

Investigation of Al- and Ag-Based Top-Emitting Organic Light-Emitting Diodes with Metal Oxides as Hole-Injection Layer

Influence of Environmentally Affected Hole Transport Layers on Spatial Homogeneity and Charge Transport Dynamics of Organic Solar Cells

Hybrid Organic Light Emitting Device with Silicon-Rich Oxide As Hole Transporting Layer

Unraveling the Energy Landscape and Energy Funneling Modulated by Hole Transport Layer for Highly Efficient Perovskite LEDs

Effect of PVK mixed TAPC as hole transport layers on device performance of red quantum-dot light-emitting diodes

Single Conjugated Polymer with Four Stepwise HOMO Levels for Effective Hole Injection Across Large Barrier 1.4 Ev to Core–Shell Quantum Dot Layer for Electroluminescence in Inverted QLED