Abstract:Two inverted non-lighting devices with the configurations of ITO/TPBi(40 nm)/C-60(x nm)/ZnPc(x nm)/NPB(40 nm) / Al (120 nm) (x = 0, 5, 10, and 15) and ITO/TPBi (40 nm)/LiF(y nm)/Al(2 nm)/C-60(5 nm)/ZnPc(5 nm)/MoO3 (3 nm)/NPB(40 nm)/Al (120 nm) (y = 0, 0.5, 1.0, and 1.5) were fabricated. The experiments illustrate that the organic heterojunction of C-60/ZnPc can realize charge separation under external field and demonstrate that ability of charge separation and injection can be efficiently improved by the electron injection layer of LiF/Al and hole injection layer of MoO3. C-60/ZnPc was used used as charge generation layer (CGL), LiF/Al and MoO3 were employed as charge injection layers. Moreover, a series of green phosphorescent Tandem Organic Light-Emitting Diodes (TOLEDs) based on the multilayer structure of LiF/Al/C-60/ZnPc/MoO3 was also fabricated to further explore the effect of the CGL on photoelectronic performances for tandem devices. Experimental results show that the performance of tandem devices can be influenced by the effect of charge separation and injection of CGL on charge-injection balance inside TOLEDs. When the multilayer structure is LiF(0.5 nm)/Al(1 nm)/C-60 (5 nm)/ZnPc(5 nm)/MoO3 (3 nm), a green TOLED with a better charge balance and an optimal device performance is achieved, the operating voltage of the tandem device is below two-fold of correspording single OLED. The peak luminance, peak current efficiency, and peak power efficiency for the green TOLED reach 84 660 cd . m(2), 94.7 cd . A and 43 lm . W-1 respectively,

A Green Top-Emitting Organic Light-Emitting Device with Single-Mode Resonance and Improved Performance by Using WO 3 Capping Layer

A green top-emitting organic light-emitting device with improved luminance and efficiency

High-Performance Top-Emitting White Organic Light-Emitting Devices

Improved Light Outcoupling For Top-Emitting Organic Light-Emitting Devices

Double-layer Printed White Organic Light-Emitting Diodes Based on Multicomponent High-Performance Illuminants

Green Phosphorescent Tandem Organic Light-emitting Diodes Based on Organic Heterojunction of C-60/ZnPc

High-performance Green Phosphorescent Top-Emitting Organic Light-Emitting Diodes Based on FDTD Optical Simulation

Bipolar TADF Interlayer for High Performance Hybrid WOLEDs with an Ultrathin Non-Doped Emissive Layer Architecture

High efficiency green phosphorescent top-emitting organic light-emitting diode with ultrathin non-doped emissive layer

Highly Efficient Nondoped Green Organic Light-Emitting Diodes with Combination of High Photoluminescence and High Exciton Utilization

Low-voltage Top-Emitting Organic Light-Emitting Devices with an Organic Double-Heterojunction Structure

High-Efficiency Microcavity Top-Emitting Organic Light-Emitting Diodes Using Silver Anode

Comprehensive Analysis And Optimal Design Of Top-Emitting Organic Light-Emitting Devices

Investigation of Al- and Ag-Based Top-Emitting Organic Light-Emitting Diodes with Metal Oxides as Hole-Injection Layer

A Top-Emission Organic Light-Emitting Diode with a Silicon Anode and an Sm∕Au Cathode

Efficient White Electroluminescent Device with Stable Emission Spectrum

Highly Efficiency Top-Emitting Organic Light-Emitting Diode with Double Capping Layers

Fabrication of highly efficient blue top-emission organic light-emitting diodes on different reflective electrodes

Development of a Highly Efficient Hybrid White Organic-Light-Emitting Diode with a Single Emission Layer by Solution Processing

High Colour Rendering Index White Organic Light-Emitting Devices with Three Emitting Layers

Hybrid Tamm Plasmon-Polariton/Microcavity Modes for White Top-Emitting Organic Light-Emitting Devices