Abstract:White-light OLED devices play an important application in information display fields. Optical interference of the microcavity structure has an important effect on device performances. According to the design of the band structure, ITO/MoO3 composite films were used as the anode, and Mg : Ag (1%) composite films were prepared by coevaporation as the translucent cathode; CuPc was used as the hole injection layer and anode passivation layer, NPB as the hole transmission layer and yellow light main material, rubrene as yellow dopant material, ADN as blue light main material, DSA-Ph as blue dopant material, and TPBi and Alq3 as the electron transport layers. We realized the change of the microcavity structure by adjusting the thickness of each organic functional layer film and simulated and calculated the optimized thickness of each organic film layer and influence on OLED device performances using the SimOLED software system. The optimized OLED microdisplay structure is Si(CMOS)/ITO (35 nm)/MoO3 (2 nm)/CuPc (5 nm)/2-TNATA (20 nm)/NPB (10 nm)/NPB : rubrene (1.5%)ADN : DSA-Ph (5%) (25 nm)/TPBi (15 nm)/Alq3 (1.2 nm)/Mg (13 nm) : Ag (1%). The optimized OLED microdisplay was prepared by the vacuum coating system, and the photoelectric performances of the OLED device were characterized by a spectral testing system consisting of the Photo Research PR655 spectrometer and Keithley 2400 program-controlled power supply. The effect of the microcavity structure on OLED device performances was studied. The results show that the variation of the film thickness of each organic functional layer has an important effect on the performances of OLED microdisplay, such as brightness and color coordinate, and the OLED microdisplay reaches a higher brightness of 3342 cd/m2 under the normal working voltage at 5.0 V after the structure is optimized, with CIE coordinate (0.28, 0.37), which is closer to the energy point of standard white light.

Microcavity OLED using Ag electrodes

High-Efficiency Microcavity Top-Emitting Organic Light-Emitting Diodes Using Silver Anode

Mononuclear Silver Complexes for Efficient Solution and Vacuum‐Processed OLEDs

Low Operating-Voltage and High Power-Efficiency OLED Employing MoO3-doped CuPc As Hole Injection Layer

Performance Optimization of Top-Emitting OLED Based on PEN Flexible Substrate with Microcavity

Highly Efficient Dual-Dopant Enhanced Emission OLEDs

Tricolor Microcavity Oleds Based On P-Nc-Si:H Films As The Complex Anodes

Study on low-temperature evaporation of Ag 2 O-based Ag electrode and electron injection layer and their application in OLEDs

Transparent ultrathin Ag nanomesh electrode fabricated by nanosphere lithography for organic light-emitting devices

22.3: High Efficiency Electrophosphorescent Organic Light Emitting Diodes Using Semitransparent Ag As Anode

High-Density Integration of Ultrabright OLEDs on a Miniaturized Needle-Shaped CMOS Backplane

Design Simulation and Preparation of White OLED Microdisplay Based on Microcavity Structure Optimization

Optical calculation of transparency of Ag film cathode in top-emitting OLED application

Fabrication and characterization of Ag film with sub-nanometer surface roughness as a flexible cathode for inverted top-emitting organic light-emitting devices.

Efficiency Improvement of Phosphorescent Organic Light-Emitting Diodes Using Semitransparent Ag As Anode

A highly transparent laminated composite cathode for organic light-emitting diodes

P‐124: Efficiency Enhanced Top Emitting OLED‐on‐Silicon Microdisplay with Aluminum Anode

P-159: Decomposable Alkali Compounds for Transparent Cathodes in OLEDs

Exciplex host coupled with a micro-cavity enabling high efficiency OLEDs with narrow emission profile

High-efficiency top-emitting organic light-emitting diodes based on metal/ITO composite electrodes

Highly Efficient Top-Emitting Organic Light-Emitting Devices with Aluminium Electrodes