Abstract:Anti-ambipolar behavior has been observed in multilayer two-dimensional semiconductors and many p–n junctions. However, temperatures in the range of tens of kelvin are usually required, and there are gaps in the understanding of the underlying physics, most notably the roles of the space charge region and van der Waals (vdW) heterojunction. Here, we systematically investigate the unique transport and transfer characteristics of vertically stacked vdW contacted p-WSe2/n-SnS2 and p-WSe2/n-MoS2 junctions. Interestingly, robust anti-ambipolar behavior is observed at low and room temperature for both darkened and illuminated conditions. A peak-to-valley current ratio exceeding 104 and on-state gating field ranging from −0.3 × 106 to 0.57 × 106 V/cm are achieved at room temperature in darkness. Moreover, the rectifying effect and the type of majority charge carrier of the WSe2/SnS2 junction can be tuned by an electric gate. Robust Raman quenching over the whole interface induced by strong charge transfer is also observed. Based on an equivalent circuit model, a Poisson and drift-diffusion simulation, and experiments with local illumination, we highlight the role of the van der Waals heterojunction. We show that the observed unique anti-ambipolar behavior is due to the recombination of electrons and holes at the space charge region rather than carrier diffusion in the turned-off metal-oxide-semiconductor field-effect transistor (MOSFET). A larger vdW barrier and interface recombination at the vdW barrier are key to having a strong on/off ratio especially at room temperature. The p–n vdW heterostructure plays the roles of a complementary MOSFET connecting with a heterojunction diode, not only a ternary logic inverter but also a tunable multiple-gain amplifier in wide-range gating fields. The width of the middle logic plateau can reach 45 V in a WSe2/MoS2 junction.

Fermi‐Level Pinning Free High‐Performance 2D CMOS Inverter Fabricated with Van Der Waals Bottom Contacts

Fermi-Level Pinning-Free WSe2 Transistors via 2D Van der Waals Metal Contacts and Their Circuits

Electrical Polarity Modulation in V‐Doped Monolayer WS2 for Homogeneous CMOS Inverters

Large-Scale Complementary Logic Circuit Enabled by Al2O3 Passivation-Induced Carrier Polarity Modulation in Tungsten Diselenide

Contact and injection engineering for low SS reconfigurable FETs and high gain complementary inverters

Unipolar P-Type Monolayer WSe2 Field-Effect Transistors with High Current Density and Low Contact Resistance Enabled by Van Der Waals Contacts

Fabrication of High-Gain CMOS Inverter Based on Ambipolar WSe2 Negative-Capacitance FETs With Ferroelectric HfZrAlO as Gate Dielectric

Quasi-Zero-Dimensional Source/Drain Contact for Fermi-Level Unpinning in a Tungsten Diselenide (WSe2) Transistor: Approaching Schottky-Mott Limit

Van der Waals polarity-engineered 3D integration of 2D complementary logic

WSe2 N‐Type Negative Capacitance Field‐Effect Transistor with Indium Low Schottky Barrier Contact

Realization of MoTe2 CMOS inverter by contact doping and channel encapsulation

A New Opportunity for 2D van der Waals Heterostructures: Making Steep‐Slope Transistors

Two-dimensional material-based complementary ambipolar field-effect transistors with ohmic-like contacts

Complementary Two-Dimensional Vertical Transistors through Lamination with a van der Waals Metal

Top Gate Engineering of Field-Effect Transistors Based on Wafer-Scale Two-Dimensional Semiconductors

Precisely Tailoring WSe2 Polarity via van der Waals Bismuth-Gold Modulated Contact

Polarity tuning of carbon nanotube transistors by chemical doping for printed flexible complementary metal-oxide semiconductor (CMOS)-like inverters

Robust Anti-Ambipolar Behavior and Gate-Tunable Rectifying Effect in van der Waals p–n Junctions

Low‐Power Complementary Inverter with Negative Capacitance 2D Semiconductor Transistors

Quasi-Zero-Dimensional Source/Drain Contact for Fermi-Level Unpinning in a Tungsten Diselenide (WSe 2 ) Transistor: Approaching Schottky-Mott Limit

Flexible Complementary Metal‐Oxide‐Semiconductor Inverter Based on 2D p‐type WSe2 and n‐type MoS2