Abstract:The circuit-level simulation analysis of the single event transient response of an on-chip single event latchup protection switch (SPS cell), previously designed and developed in the IHP 250 nm CMOS process, is presented. The SPS cell provides the latchup protection for standard cells on the principle of power domain control. It is based on a sensing/driving PMOS transistor which acts both as a latchup sensor and a driver for the standard cells, and includes additional PMOS and NMOS transistors for controlling the sensing/driving transistor and interfacing to the external control logic. The previous work has confirmed the SPS cell’s functionality in the case of single event latchup, and the experimental investigation has proven that the SPS cell is immune to single event latchup for LET values up to 74.8 MeV∙cm2/mg. This case study extends the previous research by introducing the circuit-level simulation of the SPS cell’s response to the single event transients (SETs). Using the square pulse current as a SET model, the amplitude and duration of the SET-induced voltage pulses at the SPS cell’s outputs have been analyzed with respect to the injected charge, operating temperature, supply voltage, load (number of standard cells connected to the SPS cell) and sensing/driving transistor’s channel width. The results have shown that the immunity of the SPS cell to SETs can be significantly enhanced by connecting a larger number of standard cells to the SPS cell and increasing the sensing/driving transistor’s size, without any area overhead. An analytical expression for calculating the critical charge in terms of the transistor size and the number of standard cells connected to the SPS cell has been derived. Moreover, the SPS cell can be used as a SET sensor for detecting the levels of injected charge which cannot be mitigated by the increase of transistor size and load, and in conjunction with the external control logic it could be possible to measure the SET duration and perform online corrections of the SET-induced faults in the standard cells supplied by the SPS cell.

A new criterion for transient latchup analysis in bulk CMOS

Transient latchup characteristics in n-well CMOS

Static CMOS Latch-Up Considerations in HVIC Design

Comparative research on “high currents” induced by single event latch-up and transient-induced latch-up

Physics-based Analytical Modeling of CMOS Latchup

Dynamic Gate Capacitance Model for Switching Transient Analysis in P-GaN Gate HEMTs

The Influence of an LIGBT on CMOS Latch Up in Power Integrated Circuit

Understanding and modeling of internal transient latch-up susceptibility in CMOS inverters due to microwave pulses.

Investigation of the Trigger Voltage Walk-In Effect in Ldmos for High- Voltage Esd Protection

An experimental extracted model for latchup analysis in CMOS process

Theoretical modeling of effect of pulse width on microwave pulse triggered internal transient latch-up in CMOS inverters

Device Simulation Studies on Latch-Up Effects in CMOS Inverters Induced by Microwave Pulse

A novel heavily doped drift - auxiliary cathode lateral insulated gate transistor structure

An Investigation on Capacitance-Trigger ESD Protection Devices for High Voltage Integrated Circuits

Double Snapback Phenomena in Transient Power-Rail Esd Clamp Circuits for Latch-Up Free Concerns

Effect Of Charge Sharing On The Single Event Transient Response Of Cmos Logic Gates

Area-efficient Transient Power-Rail Electrostatic Discharge Clamp Circuit with Mis-Triggering Immunity in a 65-Nm CMOS Process

A Compact Quasi-Static Terminal Charge and Drain Current Model for Double-Gate Junctionless Transistors and Its Circuit Validation

Circuit-Level Simulation of the Single Event Transients in an On-Chip Single Event Latchup Protection Switch

Low Power, and Highly Reliable Single Event Upset Immune Latch for Nanoscale CMOS Technologies

A Single Event Upset Tolerant Latch with Parallel Nodes.