Abstract:By changing Zr concentrations, Fe1-x-Zrx (x= 0.25 & 1 at.%) alloys were successfully produced in an argon atmosphere using the mechanical alloying method. The produced Fe1-x-Zrx alloys were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersion X-ray analysis (EDAX), fourier transform infrared spectroscopy (FTIR), thermogravimetry analyzer (TG-DTA), ultraviolet-visible spectroscopy (UV–vis) absorption, and photoluminescence (PL) spectroscopy. According to XRD pattern analysis, the preparation alloys had a cubic crystalline structure and a complete solid solution formation. The average crystallite size for the 0.25at.% Zr concentration is found to be 7.79 nm and 11.8 nm for the 1 at.% Zr concentration. The TEM-dark field image confirms that the grain size is in the nanometric range (<100 nm). TEM-SAED spotty continuous ring pattern confirmed the complete solution formation is well correlated with the XRD results. The elemental distribution of the mechanically alloyed samples shows that Zr elements are homogeneously distributed in the Fe matrix. Bands at 3428 cm-1 in the FTIR spectrum have been linked to O–H stretching vibrations. CH2 and CH stretching vibrations were associated with peaks of about 2920 cm-1 and 2850 cm-1. The weight loss and gain changes were observed and represented in the TG-DST graph; we found that overall weight changes are + 10.7% (gain) at 1023oC for Fe 1-x-Zr x (x=0.25 at.%) alloy. The UV-visible absorbance edge revealed a blue shift when Zr was added, indicating alloy production. The energy band gap of materials was calculated using UV-vis, and it has been observed that the band gap reduces as Zr concentration increases. Zr was added to Fe1-x-Zrx alloy nanoparticles, resulting in 514 nm and 775 nm emission wavelengths. The higher PL emission peak was 514 nm at 0.25 at.% of Zr.

Preparation of amorphous Fe-Zr alloys by mechanical alloying and melt spinning methods

The Crystallization Kinetics Study of Finemet-Co Amorphous Alloys

Magnetic and Thermal Studies of Iron-Based Amorphous Alloys Produced by a Combination of Melt-Spinning and Ball Milling

Formation of amorphous Fe50Ti50 prepared by mechanical alloying and the influence of milling intensity

Ghz Microwave Permeability of Cofezr Amorphous Materials Synthesized by Two-Step Mechanical Alloying

Amorphous films of the Fe–Zr alloy prepared by ion beam assisted deposition

Fabrication of Amorphous Ti63.7Nb21.3Zr4.5Ta1.5Fe9 Powder by Mechanical Alloying

Forming Ability and Crystallization of Al-Fe-Si-Zr Amorphous Alloy

Amorphization Of Zr-Al Under Mechanical Alloying At Different Temperatures: A Re-Entrant Melting Phenomenon

Nanocrystallization Kinetics of Amorphous Fe73.5Cu1Nb3−xMoxSi13.5B9 (x=1, 2, 3) Alloys

Crystallization of Zr60Fe20Cu20 amorphous alloy

Bulk Nanostructure Formation Directly From The Multicomponent Alloy Melt

Structural, Thermal and Optical Characteristics of Fe 1-X Zr X Alloy by using Mechanical Milling Approach: Influence of Zr4+ Ion

Effect of Pouring Temperature on Microstructure and Mechanical Properties of Zr-Based Amorphous Alloys

Evolution from Amorphous to Nanocrystalline and Corresponding Magnetic Properties of Fe-Si-B-Cu-Nb Alloys by Melt Spinning and Spark Plasma Sintering

Synthesis of High-Thermally Stable Ni60Nb13.3Zr13.3Ti13.3 Amorphous Alloy by Mechanical Alloying

On the Preparation of Amorphous Mg–Ni Alloys by Mechanical Alloying

A Nonconventional Method to Produce Zr Alloys to Study the Fe23Zr6 Intermetallic Compound in the Fe-Zr System

Novel tin-added bulk amorphous Fe-based alloys

Structural Properties and Thermal Stability of Glassy (Zr<sub>.65</sub>Al<sub>.075</sub>Cu<sub>.175</sub>Ni<sub>.1</sub>)<sub>100-x</sub>Fe<sub>x</sub> (x≤20) Alloys Prepared by Mechanical Alloying