Abstract:By changing Zr concentrations, Fe1-x-Zrx (x= 0.25 & 1 at.%) alloys were successfully produced in an argon atmosphere using the mechanical alloying method. The produced Fe1-x-Zrx alloys were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersion X-ray analysis (EDAX), fourier transform infrared spectroscopy (FTIR), thermogravimetry analyzer (TG-DTA), ultraviolet-visible spectroscopy (UV–vis) absorption, and photoluminescence (PL) spectroscopy. According to XRD pattern analysis, the preparation alloys had a cubic crystalline structure and a complete solid solution formation. The average crystallite size for the 0.25at.% Zr concentration is found to be 7.79 nm and 11.8 nm for the 1 at.% Zr concentration. The TEM-dark field image confirms that the grain size is in the nanometric range (<100 nm). TEM-SAED spotty continuous ring pattern confirmed the complete solution formation is well correlated with the XRD results. The elemental distribution of the mechanically alloyed samples shows that Zr elements are homogeneously distributed in the Fe matrix. Bands at 3428 cm-1 in the FTIR spectrum have been linked to O–H stretching vibrations. CH2 and CH stretching vibrations were associated with peaks of about 2920 cm-1 and 2850 cm-1. The weight loss and gain changes were observed and represented in the TG-DST graph; we found that overall weight changes are + 10.7% (gain) at 1023oC for Fe 1-x-Zr x (x=0.25 at.%) alloy. The UV-visible absorbance edge revealed a blue shift when Zr was added, indicating alloy production. The energy band gap of materials was calculated using UV-vis, and it has been observed that the band gap reduces as Zr concentration increases. Zr was added to Fe1-x-Zrx alloy nanoparticles, resulting in 514 nm and 775 nm emission wavelengths. The higher PL emission peak was 514 nm at 0.25 at.% of Zr.

A Nonconventional Method to Produce Zr Alloys to Study the Fe23Zr6 Intermetallic Compound in the Fe-Zr System

An Alloying Element Screening Method to Design Zr2Co Based Alloys with Superior Disproportionation Resistance

Study of gradient eutectic structure changes and mechanical-corrosion properties of Zr–Fe binary alloys

Structural, Thermal and Optical Characteristics of Fe 1-X Zr X Alloy by using Mechanical Milling Approach: Influence of Zr4+ Ion

Production of Al-Zr Master Alloy by Electrolysis of the KF-NaF-AlF3-ZrO2 Melt: Modifying Ability of the Master Alloy

Characterisation of Fe Distribution in the Liquid–Solid Boundary of Al–Zn–Mg–Si Alloy Using Synchrotron X-ray Fluorescence Microscopy

Zr as an Alternative Grain Refiner in the Novel AlSi5Cu2Mg Alloy

Preparation of amorphous Fe-Zr alloys by mechanical alloying and melt spinning methods

The Influence of the Silicon Content on the Formation of Fe23B6 Metastable Phases in Fe65Co11−xB20SixZr2Hf2 Bulk Amorphous Alloys

Investigation of Precipitation Phases in As-Cast Wedge Ingot of Bulk Amorphous Zr56.6cu17.3ni12.5al9.6ti4 Alloy

Effect of Zr Microalloying on the Microstructures and Strengthening Mechanism of As-Cast Al-Fe-Zr Alloys

Influence of Zr Microalloying on the Microstructure and Room-/High-Temperature Mechanical Properties of an Al–Cu–Mn–Fe Alloy

New Insights into Solidification and Phase Equilibria in the Al-Al3Zr System: Theoretical and Experimental Investigations

Investigation of the features of phase formation in the joint aluminothermic reduction of ZrO2, Ta2O5, Nb2O5

Preparation and Melting of Zr-1.0Nb Alloy

Exploring Zr Influence on Microstructure and Mechanical Property in FeCoNiCrCuZr Eutectic High-Entropy Alloys

Acicular microstructure formation and strengthening behavior of Ti-4%Fe alloys by Zr addition

Experimental determination of phase diagram in the Zn-Fe binary system

Effects of Zr, Al, Al+Zr Addition on Phase Evolution Characteristics and Strengthening Mechanisms of Fe‐42Ni‐2Y2O3 ODS Steels Developed by Mechanical Alloying and Spark Plasma Sintering

Calorimetric Evidence for Polymorphous Constraints on Metastable Zr-Al Phase Formation by Mechanical Alloying

Influence of Zr on grain orientation, texture, and mechanical properties in hot- and warm-rolled FeCrAl alloys