Abstract:The Fe-Cr-Al-based ferritic stainless steels have attracted more attention as accident-tolerant-fuel cladding materials of nuclear reactors due to their prominent comprehensive properties. The present work investigated systematically the influence of Ta and Zr minor-additions on the microstructural stabilities at high temperatures (HTs) of Fe-Cr-Al-Mo-Nb alloys. Alloy compositions were designed in light of a cluster formula approach. Alloy ingots, in turn, were homogenized at 1473 K for 2 h, hot-rolled at 1073 K, aged at 1073 K for 24 h, and then retreated at different temperatures (1273-1473 K) for 1 h. The microstructures at different heat-treatment states were characterized with optical microscopy (OM), scanning electron microanalysis (SEM), electron probe microanalysis (EPMA) and transmission electron microscopy (TEM), respectively. The experimental results indicated that fine second-phase precipitates (primarily Laves phase) are distributed homogeneously in the ferritic matrix of aged alloys. These precipitates would be re-dissolved into the matrix when these aged alloys were retreated at a HT above 1273 K. Most of the Laves precipitates are dissolved into the matrix in the Mo/Nb/Ta-containing alloys after retreatment at 1,473 K for 1 h, while the further addition of minor Zr (about 0.1 wt %) can retard this dissolution effectively, resulting in a desirable microstructure with second-phase precipitates uniformly distributed into the refined matrix grains at HTs. Moreover, it was also found that the Zr addition can contribute to the formation of core-shell particles, in which the inner-core is enriched by Zr to form a cubic Zr2Fe phase and the out-shell exhibits a Laves phase structure segregated by Ta and Nb. (C) 2019 Elsevier B.V. All rights reserved.

Influence of Zr on grain orientation, texture, and mechanical properties in hot- and warm-rolled FeCrAl alloys

Effects of Zr Addition on the Deformation Behavior, Microstructure and Mechanical Properties of Dental Ti Alloys

Effect of Zr Addition on the Stability of Precipitated Laves Phase and Mechanical Properties of Fe–Cr–Al-based Alloys at High Temperatures

Effect of Zr addition on coarse Laves phase stimulated nucleation of recrystallization in FeCrAl alloy

Influence of Zr Microalloying on the Microstructure and Room-/High-Temperature Mechanical Properties of an Al–Cu–Mn–Fe Alloy

Effects of Zr on high temperature deformation and dynamic precipitation of laves phase in Fe–13Cr–5Al–2Mo–0.5Nb–0.4Ta alloy

Understanding Roles of Zr and W on Hot/warm Deformation Behavior of FeCrAl Alloy: Grain Boundary Features and Dynamic Precipitation of Laves Phase

Effect of Zr on Precipitation Kinetics of Fe-Cr-Al Alloys

Dynamic Precipitation of Laves Phase and Grain Boundary Features in Warm Deformed FeCrAl Alloy: Effect of Zr

Influence of Ta/Zr Minor-Alloying on the High-Temperature Microstructural Stability of Cladding Fe–Cr–Al Ferritic Stainless Steels

Improved Strength and Enhanced Pitting Corrosion Resistance of Al-Mn Alloy with Zr Addition

Dynamic Precipitation of Laves Phase in FeCrAl Alloy with Zr Addition

Effect of Zr Microalloying on the Microstructures and Strengthening Mechanism of As-Cast Al-Fe-Zr Alloys

Effect of Zr addition on the microstructure evolution and mechanical properties of extruded Al-Cu-Li-Mn alloys

Mechanical property and strengthening mechanism of ZrC nanoparticle dispersion-strengthened Mo containing FeCrAl alloys

Control of Laves Precipitation in a FeCrAl-based Alloy Through Severe Thermomechanical Processing

Effects of Zr Addition on the Microstructure and Mechanical Properties of AlCoCrFeNiZrx High-Entropy Alloys

Investigation on the Oxidation and Corrosion Behaviors of FeCrZr Alloy As a Protective Material for Zr Cladding

Influence of Zr content on microstructure and mechanical properties of As-cast Al-Zn-Mg-Cu alloy

Effect of Zr on Microstructure and Mechanical Properties of Binary TiAl Alloys

Effects of Zr on Microstructures and Properties of a Β Matrix Mg-13Li-3Al-0.7Zr Alloy