Abstract:In this study, the effects of different influence factors on electroplating-based via-filling process were studied in a systematic manner. A through-silicon-via (TSV) chip was firstly designed, the chip size was $16\times 10{\rm mm}^{2}$ with the TSV interconnects. The via was in diameter of $50\mu {\rm m}$ and depth of $75\mu {\rm m}$. The deep reactive ion etching (DRIE) technique was employed to fabricate the vias onto the silicon wafer. In order to fill up the vias by using the electroplating process, the ${\rm SiO}_{2}$ isolation layer was firstly prepared onto the sidewall and the defined surface of the wafer using the plasma enhanced chemical vapor deposition (PECVD) technique, the TiW barrier layer was prepared onto the ${\rm SiO}_{2}$ layer with the sputtering process, the Cu seed layer was then deposited onto the barrier layer by the sputtering process to provide a foundation for copper growth during electroplated deposition. To achieve the “bottom-up” via-filling, the addictives were added into the copper plating solution. The results showed that the void free Cu filling can be achieved with an optimal additives ratio. The variation in both via opening and depth were found to be key factors influencing the via-filling quality. The process parameters such as current density, power waveform and so on were found to affect the vial filling quality. A comparison on the effects of key process parameters was made, showing that the current density, voltage waveform, and pulse reserve are three key parameters that affect the filling quality more than other parameters.

Impact of Super-long-throw PVD on TSV Metallization and Die-to-Wafer 3D Integration Based on Via-last

Influence of Electroplating Current Density on Through Silicon Via Filling

Study on the behaviors of Cu filling in special through-silicon-vias by the simulation of electric field distribution

Completely Filling of Through-Silicon-Vias with High Aspect Ratio by High Cavity Physical Vapor Deposition and Electroplating

Microfabrication of Through Silicon Vias (TSV) for 3D SiP

High Aspect Ratio Copper Through-Silicon-vias for 3D Integration

Copper Filling Process for Small Diameter, High Aspect Ratio Through Silicon Via (Tsv)

An ultra-deep TSV technique enabled by the dual catalysis-based electroless plating of combined barrier and seed layers

Moving Boundary Simulation and Experimental Verification of High Aspect-Ratio Through-Silicon-Vias for 3-D Integration

Optimization and Evaluation of Sputtering Barrier/Seed Layer in Through Silicon Via for 3-D Integration

High speed Cu-Ni filling into TSV for 3-Dimensional Si chip stacking

Tungsten Through-Silicon Via Technology for Three-Dimensional LSIs

Effects of silicon via profile on passivation and metallization in TSV interposers for 2.5D integration

Parametric study of electroplating-based via-filling process for TSV applications

Cu electroplating chemistry and process enabling rapid TSV filling with long bath life

Through-silicon via arrays manufactured by photo assisted electrochemical etching and copper electroplating under SC-CO2 environment

Through silicon via copper electrodeposition for 3D integration

Cu filling of TSV using various current forms for three‐dimensional packaging application

TSV Filling Technology using Cu Electrodeposition

Fabrication and electrical characterization of sub-micron diameter through-silicon via for heterogeneous three-dimensional integrated circuits

Improvement of Via Dishing and Non-Uniformity in TSV Chemical Mechanical Planarization