Abstract:The atmospheric tower is the main component of the crude oil refining units and is a critical area of concern due to the risk of corrosion failure. Research on the corrosion mechanism and risk protection of atmospheric tower top systems plays a vital role in the safe operation of refineries. In this paper, the water-oil two phase process flow of the atmospheric tower top system was simulated by Aspen software. A corresponding flow corrosion simulation experiment was designed according to the main characteristic parameters of the simulated stream. The experimental results under varying temperature and impact angle conditions were analyzed by using microanalysis technology and CFD simulation methods. The process and mechanism of corrosion failure of tower top system under ammonia salt and dew point corrosion environment are revealed in physicochemical aspects. The results show that the corrosion rate was highest at the dew point temperature, but as the temperature decreases, the corrosion products adsorbed and accumulated on the surface are more difficult to remove from the surface, which slows down the corrosion rate. When the impact angle increased from 0° to 60°, the increment of the surface fluid impact force and turbulence intensity makes the corrosion products easier to be stripped off, which enhances the mass transfer efficiency between the corrosive medium and the surface to accelerate the corrosion rate. Different phase states and flow modes affected the morphology of corrosion pits on the surface. The depth and size of the pits in only water phase corrosion were larger than those in the two-phase flow corrosion, Additionally, as the impact angle increased from 0°, the morphology of pits changes from a relatively flat pattern to a more undulating shape. The research results reveal the characteristics of the main corrosion types occurring in the atmospheric tower top system of the oil refining industry, and provide a reference for corrosion risk protection methods.

Investigation of corrosion sequence in the overhead pipeline of H2S stripper column through CFD models

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

Investigation on Multiphase Erosion–Corrosion of Elbow in LPG Desulfurization Unit

Numerical Simulation of Acid Gas Distribution and Corrosion Characteristics in Connecting Pipe of Lean/Rich Amine Heat Exchanger

Effects of Pipeline Corrosion on the Injection Water Quality of Low Permeability in Oilfield

Main control factors and prediction model of flow-accelerated CO2/H2S synergistic corrosion for X65 steel

Corrosion Failure Analyses of 20 Steel Pipeline for Hydrogen Transportation in Swampland

Investigation of the Influence of Flow Pattern On the Internal Corrosion in Horizontal-Vertical Downward Pipe with Oil-Water Flow

A Mechanistic Model for Pipeline Steel Corrosion in Supercritical CO2–SO2–O2–H2O Environments

Failure analysis of the collection pipeline at the outlet of air cooler in the distillation column

Numerical and experimental study on corrosion mechanism of the water-oil two-phase flow in the atmospheric tower top system

Study of the mechanism of corrosion initiation and development in the elbow of a desulfurization unit

Investigation into main controlling factors and prediction model of L245NS steel corrosion rate in CO2–O2–SO2–H2S–H2O environment

Corrosion main control factors and corrosion degree prediction charts in H2S and CO2 coexisting associated gas pipelines

Wet H2S corrosion and degradation of pipeline in amine regeneration system

Failure Analysis of A Pipeline in Sour Gas Field

Corrosion prediction in high-sulfur low-pressure vent pipelines based on wall liquid phase aggregation and droplet erosion

Study on corrosion properties of pipelines in simulated produced water saturated with supercritical CO2

Revealing the Deterioration Effect of Scale Inhibitor on the Performance of Corrosion Inhibitor under Dynamic Conditions

Analysis of Causes and Protective Measures against Corrosion Perforation in the Shell-Side Outlet Flange of a Sour Water Steam Heater

Localised corrosion failure of an L245N pipeline in a CO2–O2–Cl− environment