Abstract:Elevated concentrations of corrosive carbon dioxide or hydrogen sulfide in gas and gas condensate both produced and transported through pipelines lead to serious corrosion damage to the internal surfaces of steel infrastructure facilities. The paper presents the results of studying the corrosive effect of the medium flow along the lower component of the gas pipeline, which can exhibit a dynamic, intermittent or static character. During testing, the effect of both dynamic conditions of the medium flow on the U-shaped cell and static conditions of the permanent impact of the aqueous phase on the pipeline wall during the bubble test was evaluated. Modeling of variable wetting conditions inside the gas pipeline showed that such conditions are typical and occur upon production and transportation of raw gas to the places of gas processing and purification. We have simulated dangerous operational factors that occur inside the gas pipeline: the composition of the aquatic environment, temperature, and the content of corrosive gases. When determining the resistance of steels to local forms of corrosion (pitting, wide and shallow corrosion pits), we revealed that the rate of developing local and general corrosion of steel in aggressive carbon dioxide and hydrogen sulfide conditions can reach 2 – 3 mm/year. In addition, it has been shown that the use of corrosion inhibitors for protecting the equipment and pipelines of gas facilities can effectively prevent the occurrence of internal corrosion processes. The results obtained can be used in assessing the corrosion activity of operating media and selecting the most proven corrosion inhibitors for pilot testing at gas fields.

Corrosion main control factors and corrosion degree prediction charts in H2S and CO2 coexisting associated gas pipelines

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

Main control factors and prediction model of flow-accelerated CO2/H2S synergistic corrosion for X65 steel

CO2-O2-SRB-Cl− Multifactor Synergistic Corrosion in Shale Gas Pipelines at a Low Liquid Flow Rate

Factors Influencing the CO2 Corrosion Pattern of Oil–Water Mixed Transmission Pipeline during High Water Content Period

Research Progress on Corrosion Behavior of Oil and Gas Pipelines in Wet CO2 and H2S Environments

Corrosion and Corroded Pipelines

Investigation into main controlling factors and prediction model of L245NS steel corrosion rate in CO2–O2–SO2–H2S–H2O environment

Simulation of the Modes of Medium Flow Movement through a Gas Pipeline during Corrosion Tests

Corrosion prediction in high-sulfur low-pressure vent pipelines based on wall liquid phase aggregation and droplet erosion

Failure analysis of local effusion corrosion in small diameter gas pipeline: Experiment and numerical

Integrity Assessment of the Pipelines Containing an Isolated Corrosion Pit

Investigation of corrosion sequence in the overhead pipeline of H2S stripper column through CFD models

Probe into Water Chemistry Effects on Internal Corrosion Risk for Sour Gas Pipelines

Corrosion Detection Technology for Surface Gathering Carbon Steel Pipeline in Oil and Gas Field

CFD-Based Erosion and Corrosion Modeling of a Pipeline with CO2-Containing Gas–Water Two-Phase Flow

Localised corrosion failure of an L245N pipeline in a CO2–O2–Cl− environment

Effect of interaction between corrosion film and H2S/CO2 partial pressure ratio on the hydrogen permeation in X80 pipeline steel

Influence of H2S on the general corrosion and sulfide stress cracking of pipelines steels for supercritical CO2 transportation

Corrosion Mechanism of Oil Field Gathering Pipeline Containing Small H2S Impurity

Effect of Flow on the Corrosion Behavior of Pipeline Steel in Supercritical CO2 Environments with Impurities