An Actively-Passivated p-GaN Gate HEMT With Screening Effect Against Surface Traps
Wei Lin,Muqin Nuo,Junjie Yang,K. J. Chen,M. Hua,Maojun Wang,Li Zhang,Jin Wei,Yanlin Wu,Xuelin Yang,B. Shen,Zheyang Zheng,Y. Hao
DOI: https://doi.org/10.1109/LED.2022.3222170
IF: 4.8157
2023-01-01
IEEE Electron Device Letters
Abstract:An active-passivation p-GaN gate HEMT (AP-HEMT), featuring an active p-GaN passivation layer extending into the drain-side access region, is demonstrated on a commercial E-mode p-GaN/AlGaN/GaN heterostructure wafer. The active passivation layer (APL) is electrically connected to the p-GaN gate, and thus can supply/release mobile holes through gate electrode. The mobile holes in the APL effectively shields the overlaying surface traps from depleting the underlying 2DEG channel, and thus results in a much improved dynamic <inline-formula> <tex-math notation="LaTeX">${R}_{\text {on}}$ </tex-math></inline-formula>. After a 10-ms 650-V <inline-formula> <tex-math notation="LaTeX">${V}_{\text {DS}}$ </tex-math></inline-formula> stress, the measured dynamic <inline-formula> <tex-math notation="LaTeX">${R}_{\text {on}}$ </tex-math></inline-formula>/static <inline-formula> <tex-math notation="LaTeX">${R}_{\text {on}}$ </tex-math></inline-formula> is 4.30 for Conv-HEMT, but only 1.39 for AP-HEMT. Specially designed HEMTs with a surface testing electrode (ST) in the access region are fabricated to verify the screening effect. A negative <inline-formula> <tex-math notation="LaTeX">${V}_{\text {ST}}$ </tex-math></inline-formula> mimics the virtual gate effect caused by negative surface charges, resulting in a reduced drain current in conventional HEMT (Conv-HEMT). In the AP-HEMT, a negative <inline-formula> <tex-math notation="LaTeX">${V}_{\text {ST}}$ </tex-math></inline-formula> is shown to induce no change in the drain current, indicating an effective screening of the trap states. On the other hand, under a positive <inline-formula> <tex-math notation="LaTeX">${V}_{\text {ST}}$ </tex-math></inline-formula> stress applied to a Conv-HEMT, electrons in the 2DEG channel are pulled over the AlGaN barrier and get trapped at the surface, resulting in a sharply decreased drain current after positive <inline-formula> <tex-math notation="LaTeX">${V}_{\text {ST}}$ </tex-math></inline-formula> is removed. For the AP-HEMT, the drain current remain unchanged after the positive <inline-formula> <tex-math notation="LaTeX">${V}_{\text {ST}}$ </tex-math></inline-formula> is removed. The actively passivated HEMT exhibits the highly desired suppression of surface trap induced dynamic <inline-formula> <tex-math notation="LaTeX">${R}_{\text {on}}$ </tex-math></inline-formula> degradation.
Materials Science,Physics,Engineering