Abstract:In this paper, a three-way reconfigurable power divider/combiner is proposed based on novel switch element with matching network (SEMN) and reconfigurable impedance transformer network (RITN). A good matching performance and a high isolation of the SEMN with one p-i-n diode can be obtained by the parasitic inductance and reverse capacitance of the p-i-n diode involved in matching circuits. With different parameters of one p-i-n diode under forward bias and reverse bias, the reconfigurable impedance matching can be obtained by the RITN with a simple structure. By using four RITNs and nine SEMNs, the three-way reconfigurable power divider/combiner can provide seven different states in the three-path mode, the two-path mode, and the single-path mode. For verification, a 5-GHz three-way reconfigurable power divider/combiner is designed and fabricated. In the three-path mode, measured insertion losses from port 1 to transmission ports (port 2, port 3, and port 4) are less than 0.74 dB and the isolations between transmission ports are higher than 32.1 dB. In the two-path mode with three states, the measured insertion losses are less than 0.93 dB; the isolations between transmission ports, transmission ports and isolation ports, and port 1 and isolation ports are higher than 27.5, 35.1, and 30.5 dB, respectively. In the single-path mode with three states, the measured insertion losses are less than 1.13 dB; the measured isolations between transmission ports and isolation ports are higher than 28.8 dB, and the isolations between port 1 and isolation ports are higher than 28.2 dB at the design frequency.

A Frequency, Output Ports Reconfigurable Power Divider Based on Reconfigurable Matching Network

Design Method of Reconfigurable N -Way Power Divider Based on Reconfigurable Impedance Matching Network

A Three-Way Reconfigurable Power Divider/Combiner

A Novel Reconfigurable Three-Way Power Divider Constructed on Unitary Plane

An $N$ -Way Reconfigurable Power Divider

Reconfigurable Unequal Power Divider with a High Dividing Ratio

N-Way Reconfigurable Power Divider with Parallel Reconfigurable-Characteristic-Impedance Transformation Lines

Novel Dual-Band Out-of-Phase Power Divider with High Power-Handling Capability

Compact Reconfigurable Power Divider with Low Insertion Loss

Miniaturized Ultrawideband Reconfigurable Power Divider Based on Slotline and Double-Sided Parallel-Strip Line

Planar Four-Way Power Divider with Stopband Rejection and Good Output Isolation

Multi-way Differential Power Divider with Microstrip Output Interfaces

Proposal and Design of a Power Divider with Wideband Power Division and Port-to-Port Isolation: A New Topology

A New Gysel Out-of-Phase Power Divider With Arbitrary Power Dividing Ratio Based on Analysis Method of Equivalence of <i>N</i>-Port Networks

<italic>N</italic>-Port Equal/Unequal-Split Power Dividers Using Epsilon-Near-Zero Metamaterials

A Power Divider with Tunable Power

A new design of compact microstrip Wilkinson power dividers

A Continuously Tunable Wilkinson Power Divider with a Flat Division Ratio

Compact Four-Way Radial-Cavity-Based Power Divider/Combiner with High Power and High Isolation

A Novel Single Pin Diode Reconfigurable Impedance Matching Network With A Simplified Solution Method

A Four-Way Half-Mode SIW Power Divider with Improved Impedance Match