Abstract:In this paper, we present a broadband out-of-phase power divider with high power-handling capability. The proposed device consists of several sections of double-sided parallel-strip lines (DSPSLs), a mid-inserted conductor plane, and two external isolation resistors, which are directly grounded for heat sinking. A through ground via (TGV), connecting the top and bottom sides of DSPSLs, is employed. The special metal via is realized to short the isolation resistors at full-frequency band when the odd-mode is excited. Meanwhile, it can be ignored as the excitation is even-mode. This property is efficiently utilized to improve the bandwidth. To examine the proposed power divider in detail, a set of closed-form equations are derived. Meanwhile, the power operation analysis illustrates that the proposed power divider is a good candidate for high power applications. The design charts show that the proposed device can support a wide frequency ratio range (1-1.7). Furthermore, broadband responses can be obtained when proper frequency ratios are adopted. For verification, an experimental power divider operating at 1.25/1.75 GHz is implemented. The measured results exhibit a bandwidth of 44.3% with better than 15 dB return loss and 18 dB port isolation is achieved.

A Design of V-band Reconfigurable SPDT Switch/Power Divider Based on Slotted SIW

A Half-Mode Substrate Integrated Waveguide Ring for Two-Way Power Division of Balanced Circuit

3D Heterogenous Integrated Wideband Switchable Bandpass Filter Bank for Millimeter Wave Applications

A Novel Reconfigurable Three-Way Power Divider Constructed on Unitary Plane

W-band Power Divider Based on H-plane Slot Waveguide Bridge

Novel Four-Way Multilayer SIW Power Divider with Slot Coupling Structure

A Compact and Reconfigurable C-Band DGS-based power divider using RF MEMS Capacitive switch

A BROADBAND OUT-OF-PHASE POWER DIVIDER FOR HIGH POWER APPLICATIONS USING THROUGH GROUND VIA (TGV)

A wideband fully enclosed coaxial‐to‐substrate‐integrated waveguide transition and its applications in a 1‐to‐4 radial power divider

SIW based in-phase Gysel equal power divider for X-band application

A 16-Way Low-Loss mm-Wave Power-Dividing Network Using Patch Elements on the SISL Platform

A Novel Compact, Wideband Four-Way Wilkinson Power Divider with an Improved Isolation Topology

Hybrid Coaxial/Substrate Integrated Waveguide Eight-Way Power Divider

Compact Reconfigurable Power Divider with Low Insertion Loss

Wideband Half-Mode SIW Power Divider With Improved Output Isolation Using Slotline Isolation Technology

Frequency-Tunable Nonreciprocal SIW Filtering Power Divider Using a Common Resonator With Mixed Static and Time-Modulated Degenerate Modes

Wideband Four-Way Filtering Power Divider Based on Hybrid Spoof Surface Plasmon Polariton and Substrate Integrated Waveguide

Broadband Six-Way Out-Of-Phase Siw Power Divider

Gallium-Based Liquid Metal Substrate Integrated Waveguide Switches

Novel Design of Dual-Band Unequal Wilkinson Power Divider

Four-way SIW Filtering Power Divider with In- and Out-of-phase Characteristics and Large Power Division Ratio