Abstract:In this paper, a millimeter-wave (mmWave) dual-wideband full-metal filtering power divider (FPD) with low insertion loss is proposed. The FPD is designed using groove gap waveguide (GGW) and spoof surface plasmon polariton (SSPP) integrated with novel modified split ring resonators (MSRRs). A single-wideband T-junction FPD is first designed by embedding SSPP into the groove of GGW. The lower and upper cut-off frequencies can be conveniently adjusted by changing the width of GGW and the height of SSPP, respectively. Besides, a tuning pillar is utilized to improve impedance matching. Furthermore, two coupled MSRRs are embedded into the single-wideband FPD to introduce an extra stopband, whose center frequency and bandwidth can be tuned almost independently by the location and size of MSRRs. Thus, a dual-wideband FPD is realized. Finally, a prototype is fabricated and measured to validate the design concept. Comparison between the measured and simulated results shows a good agreement. The frequency ranges of the lower and upper bands are 20.92 - 24.92 GHz and 27.48 - 32.12 GHz with average insertion losses of 0.45 dB and 0.70 dB, respectively. Within both bands, the magnitude and phase differences between the two output ports are lower than 0.3 dB and 6°, respectively.

Wideband Four-Way Filtering Power Divider Based on Hybrid Spoof Surface Plasmon Polariton and Substrate Integrated Waveguide

Millimeter Wave Dual Wideband Filtering Power Divider Using Groove Gap Waveguide and Spoof Surface Plasmon Polariton

Four-way SIW Filtering Power Divider with In- and Out-of-phase Characteristics and Large Power Division Ratio

Frequency-Tunable Nonreciprocal SIW Filtering Power Divider Using a Common Resonator With Mixed Static and Time-Modulated Degenerate Modes

Synthesis of miniaturized wideband four‐way filtering power divider consisting of unequal‐width three‐coupled‐lines

Balanced Filtering Power Divider Based on Odd-mode Hybrid Microstrip and Slotline Spoof Surface Plasmon Polaritons

A Wideband Substrate Integrated Waveguide Filtering Power Divider

Broadband Balanced-to-Balanced Filtering Power Divider Using HMSIW-SSPP Transmission Line

Dual-Band Millimeter-Wave Filtering Power Divider Using Groove Gap Waveguide and Spoof Surface Plasmon Polariton

Wideband Four-Way Filtering Power Divider with Isolation Performance Using Three Parallel-Coupled Lines

Multilayer Four-Way Out-of-Phase Power Divider Based on Substrate Integrated Waveguide Technology.

A mmWave Waveguide Filtering Power Divider Based on SSPP-RWG Structure

Compact 4.0–5.1 GHz Filtering Power Divider with Low Insertion Loss and Wide Stopband Using RC-Loaded Coupled SIDGS Resonators

An Ultra‐wideband Out‐of‐phase Power Divider Based on Odd‐mode Spoof Surface Plasmon Polariton

Design of Compact Wideband Filtering Power Divider with Extended Isolation and Rejection Bandwidth

Exact synthesis of couple‐line based wideband four‐way filtering power divider with unequal power division

A 3.4–7.4-Ghz Filtering Power Divider with Wide Stopband and Low Radiation Loss Using Triple-Mode Hybrid Microstrip/SIDGS Resonator

Three-Way Substrate-Integrated Waveguide Filtering Power Divider with In-Phase and Anti-Phase Outputs

Compact Quadruple-Mode FSIW Filtering Power Divider With High Isolation Using Embedded Capacitive Isolation Network

Broadband Eight-Way Differential SIW Power Divider with Bandpass-Filtering Response Using Novel Hybrid Multiple-via Probe and Multiple Radial Slots.

Four-way Wideband Power Divider Using a Hybrid HMSIW/microstrip Line