Abstract:This paper presents a miniaturized tri- and quad-band power divider (PD)based on substrate integrated waveguide (SIW). By adopting different types of modified circular complementary split-ring resonators on the top surface of SIW, multiple passbands are generated propagating below the SIW cut-off frequency. The working principle is based on evanescent mode propagation that decreases the operating frequency of the PD and helps in the miniaturization of the proposed structure. The operating frequency of the proposed PD can be individually controlled by changing the dimensions of the resonator. To verify the proposed concept, a tri-band and a quad-band PD exhibiting 3 dB equal power division at 2.41/3.46/4.65 GHz and 2.42/3.78/4.74/5.8 GHz are designed using the full-wave simulator, validated through circuit model, fabricated and experimentally verified. The measured results agree well with the simulations. The proposed PDs have good performance in terms of reasonable insertion loss, isolation, minimum amplitude and phase imbalance, smaller footprint, easy fabrication and integration. The size of the fabricated prototype is 18.3 mm x 8.4 mm, which corresponds to 0.205 lambda(g) x 0.094 lambda(g), lambda(g) being the guided wavelength at the first operating frequency.

Frequency-Tunable Nonreciprocal SIW Filtering Power Divider Using a Common Resonator With Mixed Static and Time-Modulated Degenerate Modes

A Millimeter-Wave Filtering Power Divider Based on Rectangular SIW Resonator

A Design of V-band Reconfigurable SPDT Switch/Power Divider Based on Slotted SIW

Wideband Four-Way Filtering Power Divider Based on Hybrid Spoof Surface Plasmon Polariton and Substrate Integrated Waveguide

Four-way SIW Filtering Power Divider with In- and Out-of-phase Characteristics and Large Power Division Ratio

Compact Quadruple-Mode FSIW Filtering Power Divider With High Isolation Using Embedded Capacitive Isolation Network

High Selectivity Filtering Power Divider Based on SAW Resonator

Reconfigurable Dual-Band Filtering Power Divider with Ultra-Wide Stopband Using Hybrid Microstrip/Square Defected Ground Structure

A Tri-Section Substrate Integrated Waveguide Filtering Power Divider with a Wide Stopband

Design of Compact Wideband Filtering Power Divider with Extended Isolation and Rejection Bandwidth

Compact 4.0–5.1 GHz Filtering Power Divider with Low Insertion Loss and Wide Stopband Using RC-Loaded Coupled SIDGS Resonators

A Multi-functional Frequency Selective Polarization Converter Based on Substrate Integrated Waveguide Cavities

Design of Filtering Power Divider with High Frequency Selectivity

A Wideband Substrate Integrated Waveguide Filtering Power Divider

Three-Way Substrate-Integrated Waveguide Filtering Power Divider with In-Phase and Anti-Phase Outputs

Wideband filtering power divider based on D-CRLH resonator

Design and Implementation of Compact Tri- and Quad-Band SIW Power Divider Using Modified Circular Complementary Split-Ring Resonators

Dual-Band Filtering Power Divider Using Dual-Resonance Resonators with Ultrawide Stopband and Good Isolation

Self-Packaged Mm-Wave Broadband Air-Filled SIW Filtering Power Divider with Sharp Roll-Off Skirt and High In-Band Isolation

A Compact SIW Power Divider for Dual-Band Applications

A 3.4–7.4-Ghz Filtering Power Divider with Wide Stopband and Low Radiation Loss Using Triple-Mode Hybrid Microstrip/SIDGS Resonator