Abstract:Purpose This paper aims to present a compact, broadband substrate integrated waveguide (SIW) three-way power divider with improved isolation based on six-port SIW coupler. Design/methodology/approach The power coupling among the three output ports occurs due to short openings in the narrow walls of the central SIW channel. Performance improvement in the isolation and return loss among ports is achieved using matching posts placed at the input and output ends of the coupling region. This enhances the coupling between TE10 and TE30 modes. The input matching ports enhance the return loss, whereas the isolation is alleviated by both the input and output matching posts. The bandwidth enhancement is achieved by optimizing the outer SIW channel widths. Findings The measured fractional bandwidth of 27.3% with over 15 dB of isolation and return loss is achieved. The coupling length is 1.55 λg at the centre frequency. The power divider achieves better than 15 dB isolation between non-adjacent output ports. The measured reflection and isolation coefficients are in close agreement with simulated results over 8.2 to 10.8 GHz. Practical implications Isolation between the adjacent and non-adjacent ports is an important parameter as the reflections from these ports will interfere with signals from other ports reducing the fractional bandwidth of the power divider and affecting the overall performance of the transmitters and receivers. Originality/value The authors present the enhancement of isolation between the output non-adjacent ports by optimizing the SIW channel width and matching post in the coupling region to reduce the reflected signals from non-adjacent ports entering into other ports. To the author’s knowledge, this is the only SIW three-way power divider paper showing non-adjacent port isolation among six-port couplers based three-way power dividers.

Wideband Half-Mode SIW Power Divider With Improved Output Isolation Using Slotline Isolation Technology

Wideband Gysel HMSIW Power Divider with High Power-Handling Capability

A Half-Mode Substrate Integrated Waveguide Ring for Two-Way Power Division of Balanced Circuit

A Design of V-band Reconfigurable SPDT Switch/Power Divider Based on Slotted SIW

Extended Doublet Bandpass Filters Implemented with Microstrip Resonator and Full-/Half-Mode Substrate Integrated Cavities

Four-way Wideband Power Divider Using a Hybrid HMSIW/microstrip Line

Single- and dual-band filtering-response power dividers embedded SIW filter with improved output isolation

A New Type of Periodically Loaded Half-Mode Substrate Integrated Waveguide and Its Applications

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Novel Four-Way Multilayer SIW Power Divider with Slot Coupling Structure

Broadband Balanced-to-Balanced Filtering Power Divider Using HMSIW-SSPP Transmission Line

A compact, broadband three-way substrate integrated waveguide power divider with improved isolation

W-band Power Divider Based on H-plane Slot Waveguide Bridge

Wideband Four-Way Filtering Power Divider with Isolation Performance Using Three Parallel-Coupled Lines

High Isolation Substrate Integrated Waveguide Diplexer With Flexible Transmission Zeros

Compact Quadruple-Mode FSIW Filtering Power Divider With High Isolation Using Embedded Capacitive Isolation Network

Planar Four-Way Power Divider with Stopband Rejection and Good Output Isolation

A Novel Compact, Wideband Four-Way Wilkinson Power Divider with an Improved Isolation Topology

A BROADBAND OUT-OF-PHASE POWER DIVIDER FOR HIGH POWER APPLICATIONS USING THROUGH GROUND VIA (TGV)

Frequency-Tunable Nonreciprocal SIW Filtering Power Divider Using a Common Resonator With Mixed Static and Time-Modulated Degenerate Modes

Wideband three-way power divider with bandpass filtering response using unequal-width three-coupled line