Abstract:In this article, a class of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$2^{n}$ </tex-math></inline-formula> -way wideband filtering power dividers (FPDs) is presented and designed with a wide isolation band. It consists of ( <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$2^{n}-1$ </tex-math></inline-formula> ) two-way power-dividing units and <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$n$ </tex-math></inline-formula> three-line coupled lines. The basic two-way power divider is achieved by replacing a simple isolation resistor of the conventional Wilkinson power divider with a modified isolation network, so as to improve the bandwidth of better-than-20-dB isolation band from 40% to 120%. The modified isolation network is composed of one quarter-wavelength coupled line, two quarter-wavelength transmission lines, and one resistor. The three-line coupled line is introduced at each output of the proposed FPD to improve its frequency selectivity and passband bandwidth. Furthermore, after placing one additional isolation resistor on each three-line coupled line, the number of output ports in the proposed power divider could be doubled without introducing more two-way power-dividing units. Finally, a prototype two-way and two prototype four-way wideband FPDs with different occupied sizes are designed and fabricated. The feasibility of the proposed design method is verified by the good agreement between the simulated and measured results.

A Synthesis Theory of Stripline Dual-Band Filtering Power Divider with Controllable Full-frequency Isolation

Design of Dual‐band Filtering Power Dividers with Designable Port‐to‐port Isolation Network

Dual-Band Filtering Power Divider Using Dual-Resonance Resonators with Ultrawide Stopband and Good Isolation

Synthesis Design of Dual-Band Filtering Power Dividers Based on E-Shape Resonators

Design of Filtering Power Divider with High Frequency Selectivity

2<italic><sup>n</sup></italic>-Way Wideband Filtering Power Dividers With Good Isolation Enhanced by a Modified Isolation Network

Design of Compact Wideband Filtering Power Divider with Extended Isolation and Rejection Bandwidth

Packaged Filtering Power Divider with High Selectivity, Extended Stopband and Wideband Isolation

2n-Way Wideband Filtering Power Dividers With Good Isolation Enhanced by a Modified Isolation Network

Wideband Microstrip Filtering Power Divider Designed by Direct Synthesis Technique (DST)

A Dual-Band Balanced-To-Balanced Power Divider With High Selectivity And Wide Stopband

Proposal and Design of a Power Divider with Wideband Power Division and Port-to-Port Isolation: A New Topology

Compact Dual-Band Balanced-to-Unbalanced Filtering Power Divider Design With Extended \textCommon-Mode Suppression Bandwidth

Exact synthesis of couple‐line based wideband four‐way filtering power divider with unequal power division

Filtering Power Divider with Good Output Balance and Unsymmetrical Structure

Synthesis of miniaturized wideband four‐way filtering power divider consisting of unequal‐width three‐coupled‐lines

Design of a Wideband Filtering Power Divider with Good In‐band and Out‐of‐band Isolations

Wideband Four-Way Filtering Power Divider with Isolation Performance Using Three Parallel-Coupled Lines

Self-Packaged Mm-Wave Broadband Air-Filled SIW Filtering Power Divider with Sharp Roll-Off Skirt and High In-Band Isolation

Design of <i>n</i>-Way Wideband Filtering Power Dividers With Good Port-Port Isolation

Filtering Power Divider with Wide Stopband Using Open-Stub Loaded Coupled-Line and Hybrid Microstrip T-Stub/DGS Cell