Abstract:In this paper, a wideband absorptive filtering power divider (AFPD) which features the characteristics of high selectivity and flat output distributions is proposed. It is composed of one unequal width three-coupled line (TCL), two coupled lines (CLs), two stepped open-circuited stubs, two kinds of isolation resistors, and two types of absorptive branches. The design equations of the proposed AFPD are derived using an even-odd decomposition method, and parametric investigations are also performed. It is found that the passband bandwidth can be adjusted by the stepped open-circuited stub which generates two transmission zeros (TZs). By combining the TCL with the CLs, the passband bandwidth is effectively enlarged. In addition, two isolated resistors are utilized for achieving good isolation and output-port matching performance. Without affecting the passband responses, the input port absorptive feature within the whole frequency band can be obtained by loading the absorptive branches both on the input and output ports. For validation, an example operating at the center frequency of 2 GHz was modeled and tested. Results exhibit that the passband FBW reaches 72% under 1 dB criterion, which illustrates flat output port distributions. In addition, for 10 dB return loss, the input and output impedance matching bandwidths are 250% and 78%, respectively. The features of good filtering responses are demonstrated by realizing the rectangle coefficient of 1.24 and the out-of-band suppression of more than 20 dB.

A Dual-Band Balanced-To-Balanced Power Divider With High Selectivity And Wide Stopband

Balanced-to-unbalanced Filtering Power Divider with Compact Size and High Common-Mode Suppression

Compact Dual-Band Balanced-to-Unbalanced Filtering Power Divider Design With Extended \textCommon-Mode Suppression Bandwidth

Dual-Band Filtering Power Divider Using Dual-Resonance Resonators with Ultrawide Stopband and Good Isolation

Filtering Power Divider with Good Output Balance and Unsymmetrical Structure

Design of Filtering Power Divider with High Frequency Selectivity

Reconfigurable Dual-Band Filtering Power Divider with Ultra-Wide Stopband Using Hybrid Microstrip/Square Defected Ground Structure

Packaged Filtering Power Divider with High Selectivity, Extended Stopband and Wideband Isolation

Wideband Microstrip Filtering Power Divider Designed by Direct Synthesis Technique (DST)

Broadband Balanced-to-Balanced Filtering Power Divider Using HMSIW-SSPP Transmission Line

Balanced Filtering Power Divider Based on Odd-mode Hybrid Microstrip and Slotline Spoof Surface Plasmon Polaritons

High-performance filtering power divider with multiple transmission zeros

A Compact Balanced-to-Balanced Filtering Gysel Power Divider Using $\lambda _{g}$ /2 Resonators and Short-Stub-Loaded Resonator

High Selectivity Filtering Power Divider Based on SAW Resonator

Design of Compact Dual-Mode Dual-Band Filtering Power Divider with High Selectivity

A Synthesis Theory of Stripline Dual-Band Filtering Power Divider with Controllable Full-frequency Isolation

A New Wideband Filtering Power Divider Based on Rectangle Patch Resonator with Compact Size

A Miniaturized Filtering Power Divider With High Selectivity and Wide Stopband Based on 3D Heterogeneous Integration Technology

Exact synthesis of couple‐line based wideband four‐way filtering power divider with unequal power division

Synthesis of Wideband All-Frequency Absorptive Filtering Power Divider with High Selectivity and Flat Output Port Distributions

Broadband Filtering Power Dividers Using Simple Three-Line Coupled Structures